Difference: CemSignups (1 vs. 12)

Revision 1215 Dec 2006 - Main.DavidCowburn

 
META TOPICPARENT name="CemfacGroup"
Contents

CEM Signup Rules

  1. Bill Rice is the administrator for the booking software (rice@nysbc.org).
  2. Signups open at noon on Monday for the following week
  3. Signups are approved by the administrator on Wednesday for the following week
  4. Individual users are limited to 2 daytime slots per 2 weeks
    • these two slots may be used during the same week, but then no slots will be available for the following week
    • users with 24-hour access may signup for unlimited after-hour/weekend slots
  5. Any daytime slots not claimed by Wednesday for the following week are may be booked at will and will not count against a user's allocation
  6. Experienced users are encouraged to get 24 hour access, which requires:
Changed:
<
<
    • Permission from the CEM director, %CEMADMIN%
>
>
    • Permission from the CEM director, EdEng
 
  1. Signups for multiple days are allowed. This is done by arrangement -- email rice@nysbc.org if you need multiple days in a row. Multiple day signups will use up your allocation for that month, but may be useful if, for example, you have a set of grids you know are good and need to get the data.

Signup Procedures

  1. Register at: http://www.nysbc.org/em-signup.
  2. Obtain necessary training on desired instrument
  3. Mail rice@nysbc.org and request booking access to desired resources.
    • Tecnai F20
    • JEOL 1230
    • high pressure freezer
    • plunge freezer
    • freeze substitution unit
    • scanners
    • vacuum evaporator

  • Set ALLOWTOPICVIEW =

-- BillRice - 22 Feb 2006

META TOPICMOVED by="DavidStokes" date="1140715383" from="Main.CemAccess" to="Main.CemSignups"

Revision 1115 Dec 2006 - Main.DavidCowburn

 
META TOPICPARENT name="CemfacGroup"
Contents

CEM Signup Rules

  1. Bill Rice is the administrator for the booking software (rice@nysbc.org).
  2. Signups open at noon on Monday for the following week
  3. Signups are approved by the administrator on Wednesday for the following week
  4. Individual users are limited to 2 daytime slots per 2 weeks
    • these two slots may be used during the same week, but then no slots will be available for the following week
    • users with 24-hour access may signup for unlimited after-hour/weekend slots
  5. Any daytime slots not claimed by Wednesday for the following week are may be booked at will and will not count against a user's allocation
  6. Experienced users are encouraged to get 24 hour access, which requires:
Changed:
<
<
>
>
    • Permission from the CEM director, %CEMADMIN%
 
  1. Signups for multiple days are allowed. This is done by arrangement -- email rice@nysbc.org if you need multiple days in a row. Multiple day signups will use up your allocation for that month, but may be useful if, for example, you have a set of grids you know are good and need to get the data.

Signup Procedures

  1. Register at: http://www.nysbc.org/em-signup.
  2. Obtain necessary training on desired instrument
  3. Mail rice@nysbc.org and request booking access to desired resources.
    • Tecnai F20
    • JEOL 1230
    • high pressure freezer
    • plunge freezer
    • freeze substitution unit
    • scanners
    • vacuum evaporator

  • Set ALLOWTOPICVIEW =

-- BillRice - 22 Feb 2006

META TOPICMOVED by="DavidStokes" date="1140715383" from="Main.CemAccess" to="Main.CemSignups"

Revision 1016 Oct 2006 - Main.BillRice

 
META TOPICPARENT name="CemfacGroup"
Changed:
<
<		Contents

CEM Signup Rules

  1. Bill Rice is the administrator for the booking software (rice@nysbc.org).
  2. Signups open at noon on Monday for the following week
  3. Signups are approved by the adminidatrator on Wednesday for the following week
  4. Individual users are limited to 2 daytime slots per 2 weeks
    • these two slots may be used during the same week, but then no slots will be available for the following week
    • users with 24-hour access may signup for unlimited after-hour/weekend slots
  5. Any daytime slots not claimed by Wednesday for the following week are may be booked at will and will not count against a user's allocation
  6. Experienced users are encouraged to get 24 hour access, which requires:

Signup Procedures

  1. Register at: http://www.nysbc.org/em-signup.
  2. Obtain necessary training on desired instrument
  3. Mail rice@nysbc.org and request booking access to desired resources.
    • Tecnai F20
    • JEOL 1230
    • high pressure freezer
    • plunge freezer
    • freeze substitution unit
    • scanners
    • vacuum evaporator

  • Set ALLOWTOPICVIEW =

-- BillRice - 22 Feb 2006

>
>		Contents

CEM Signup Rules

  1. Bill Rice is the administrator for the booking software (rice@nysbc.org).
  2. Signups open at noon on Monday for the following week
  3. Signups are approved by the administrator on Wednesday for the following week
  4. Individual users are limited to 2 daytime slots per 2 weeks
    • these two slots may be used during the same week, but then no slots will be available for the following week
    • users with 24-hour access may signup for unlimited after-hour/weekend slots
  5. Any daytime slots not claimed by Wednesday for the following week are may be booked at will and will not count against a user's allocation
  6. Experienced users are encouraged to get 24 hour access, which requires:
  7. Signups for multiple days are allowed. This is done by arrangement -- email rice@nysbc.org if you need multiple days in a row. Multiple day signups will use up your allocation for that month, but may be useful if, for example, you have a set of grids you know are good and need to get the data.

Signup Procedures

  1. Register at: http://www.nysbc.org/em-signup.
  2. Obtain necessary training on desired instrument
  3. Mail rice@nysbc.org and request booking access to desired resources.
    • Tecnai F20
    • JEOL 1230
    • high pressure freezer
    • plunge freezer
    • freeze substitution unit
    • scanners
    • vacuum evaporator

  • Set ALLOWTOPICVIEW =
Added:
>
>		-- BillRice - 22 Feb 2006
 
META TOPICMOVED by="DavidStokes" date="1140715383" from="Main.CemAccess" to="Main.CemSignups"

Revision 910 Apr 2006 - Main.BillRice

 
META TOPICPARENT name="CemfacGroup"
Contents

CEM Signup Rules

Deleted:
<
<		Beginning March 1st we will have new scheduling software. In addition to the new software, there have been some changes to the allotted usage for the Tecnai F20:
 
Changed:
<
<
  1. Bill Rice will be the new administrator for the booking software (rice@nysbc.org).
  2. The schedule will open up on Monday at noon for the following week. Slots available in the following week are based on slots used in the current week.
  3. Signups will be marked as "pending" until Wednesday, when they will be approved.
  4. Users will be allowed to sign up for two daytime blocks (total of 8 hours) in a 2-week period. This means 1 full day every two weeks.
  5. Experienced users are encouraged to get 24 hour access. This entails: permission from John Berriman, NYFD C-14 certification and a special NYSBC training course; instructions are available on the twiki page (http://www.nysbc.net/procedures/allhours.htm).
>
>
  1. Bill Rice is the administrator for the booking software (rice@nysbc.org).
  2. Signups open at noon on Monday for the following week
  3. Signups are approved by the adminidatrator on Wednesday for the following week
  4. Individual users are limited to 2 daytime slots per 2 weeks
    • these two slots may be used during the same week, but then no slots will be available for the following week
Added:
>
>
    • users with 24-hour access may signup for unlimited after-hour/weekend slots
  1. Any daytime slots not claimed by Wednesday for the following week are may be booked at will and will not count against a user's allocation
  2. Experienced users are encouraged to get 24 hour access, which requires:
 
Changed:
<
<		To signup:
>
>

Signup Procedures

 
  1. Register at: http://www.nysbc.org/em-signup.
Changed:
<
<
  1. Mail rice@nysbc.org and request booking access to desired resources. (Tecnai F20, JEOL 1230, high pressure freezer, etc).
>
>
  1. Obtain necessary training on desired instrument
  2. Mail rice@nysbc.org and request booking access to desired resources.
Added:
>
>
    • Tecnai F20
    • JEOL 1230
    • high pressure freezer
    • plunge freezer
    • freeze substitution unit
    • scanners
    • vacuum evaporator
 

  • Set ALLOWTOPICVIEW =

-- BillRice - 22 Feb 2006

META TOPICMOVED by="DavidStokes" date="1140715383" from="Main.CemAccess" to="Main.CemSignups"

Revision 804 Apr 2006 - Main.BillRice

 
META TOPICPARENT name="CemfacGroup"
Contents

CEM Signup Rules

Beginning March 1st we will have new scheduling software. In addition to the new software, there have been some changes to the allotted usage for the Tecnai F20:

  1. Bill Rice will be the new administrator for the booking software (rice@nysbc.org).
Changed:
<
<
  1. The schedule will open up on Monday at noon for the following week.
>
>
  1. The schedule will open up on Monday at noon for the following week. Slots available in the following week are based on slots used in the current week.
 
  1. Signups will be marked as "pending" until Wednesday, when they will be approved.
  2. Users will be allowed to sign up for two daytime blocks (total of 8 hours) in a 2-week period. This means 1 full day every two weeks.
  3. Experienced users are encouraged to get 24 hour access. This entails: permission from John Berriman, NYFD C-14 certification and a special NYSBC training course; instructions are available on the twiki page (http://www.nysbc.net/procedures/allhours.htm).

To signup:

  1. Register at: http://www.nysbc.org/em-signup.
  2. Mail rice@nysbc.org and request booking access to desired resources. (Tecnai F20, JEOL 1230, high pressure freezer, etc).

  • Set ALLOWTOPICVIEW =

-- BillRice - 22 Feb 2006

META TOPICMOVED by="DavidStokes" date="1140715383" from="Main.CemAccess" to="Main.CemSignups"

Revision 706 Mar 2006 - Main.DavidStokes

 
META TOPICPARENT name="CemfacGroup"
Contents

CEM Signup Rules

Beginning March 1st we will have new scheduling software. In addition to the new software, there have been some changes to the allotted usage for the Tecnai F20:

  1. Bill Rice will be the new administrator for the booking software (rice@nysbc.org).
  2. The schedule will open up on Monday at noon for the following week.
  3. Signups will be marked as "pending" until Wednesday, when they will be approved.
  4. Users will be allowed to sign up for two daytime blocks (total of 8 hours) in a 2-week period. This means 1 full day every two weeks.
  5. Experienced users are encouraged to get 24 hour access. This entails: permission from John Berriman, NYFD C-14 certification and a special NYSBC training course; instructions are available on the twiki page (http://www.nysbc.net/procedures/allhours.htm).

To signup:

  1. Register at: http://www.nysbc.org/em-signup.
  2. Mail rice@nysbc.org and request booking access to desired resources. (Tecnai F20, JEOL 1230, high pressure freezer, etc).
Changed:
<
<

CEM User List

>
>
Deleted:
<
<
Username Full Name NYFD C-14 NYSBC Training NYSBC 24-hour Access Approved for All-hours Microscopy
kderr@nysbc.org KD Derr X X X X
berriman@nysbc.org John Berriman X X X X
stokes@nysbc.org David Stokes X X X X
gowen@nysbc.org Gethin Owen pending X    
rice@nysbc.org Bill Rice pending X    
acehan@saturn.med.nyu.edu Devrim Acehan pending X    
nans@saturn.med.nyu.edu Andrea Nans pending X    
rfetter@rockefeller.edu Richard Fetter        
eva.vanamee@mssm.edu Eva Vanamee        
alexw@sci.ccny.cuny.edu Hui Wei        
jiangq@rockefeller.edu Qiu-Xing Jiang X X X X
ghu@saturn.med.nyu.edu Guobin Hu   X    
 
  • Set ALLOWTOPICVIEW =

-- BillRice - 22 Feb 2006

META TOPICMOVED by="DavidStokes" date="1140715383" from="Main.CemAccess" to="Main.CemSignups"

Revision 623 Feb 2006 - Main.DavidStokes

 
META TOPICPARENT name="CemfacGroup"
Contents
Changed:
<
<

CEM Access Rules

>
>

CEM Signup Rules

 Beginning March 1st we will have new scheduling software. In addition to the new software, there have been some changes to the allotted usage for the Tecnai F20:

  1. Bill Rice will be the new administrator for the booking software (rice@nysbc.org).
  2. The schedule will open up on Monday at noon for the following week.
  3. Signups will be marked as "pending" until Wednesday, when they will be approved.
  4. Users will be allowed to sign up for two daytime blocks (total of 8 hours) in a 2-week period. This means 1 full day every two weeks.
  5. Experienced users are encouraged to get 24 hour access. This entails: permission from John Berriman, NYFD C-14 certification and a special NYSBC training course; instructions are available on the twiki page (http://www.nysbc.net/procedures/allhours.htm).

To signup:

  1. Register at: http://www.nysbc.org/em-signup.
  2. Mail rice@nysbc.org and request booking access to desired resources. (Tecnai F20, JEOL 1230, high pressure freezer, etc).

CEM User List

Username Full Name NYFD C-14 NYSBC Training NYSBC 24-hour Access Approved for All-hours Microscopy
kderr@nysbc.org KD Derr X X X X
berriman@nysbc.org John Berriman X X X X
stokes@nysbc.org David Stokes X X X X
gowen@nysbc.org Gethin Owen pending X    
rice@nysbc.org Bill Rice pending X    
acehan@saturn.med.nyu.edu Devrim Acehan pending X    
nans@saturn.med.nyu.edu Andrea Nans pending X    
rfetter@rockefeller.edu Richard Fetter        
eva.vanamee@mssm.edu Eva Vanamee        
alexw@sci.ccny.cuny.edu Hui Wei        
jiangq@rockefeller.edu Qiu-Xing Jiang X X X X
ghu@saturn.med.nyu.edu Guobin Hu   X    

  • Set ALLOWTOPICVIEW =

-- BillRice - 22 Feb 2006

Added:
>
>
META TOPICMOVED by="DavidStokes" date="1140715383" from="Main.CemAccess" to="Main.CemSignups"
 

Revision 523 Feb 2006 - Main.BillRice

 
META TOPICPARENT name="CemfacGroup"
Contents

CEM Access Rules

Beginning March 1st we will have new scheduling software. In addition to the new software, there have been some changes to the allotted usage for the Tecnai F20:

  1. Bill Rice will be the new administrator for the booking software (rice@nysbc.org).
  2. The schedule will open up on Monday at noon for the following week.
  3. Signups will be marked as "pending" until Wednesday, when they will be approved.
  4. Users will be allowed to sign up for two daytime blocks (total of 8 hours) in a 2-week period. This means 1 full day every two weeks.
  5. Experienced users are encouraged to get 24 hour access. This entails: permission from John Berriman, NYFD C-14 certification and a special NYSBC training course; instructions are available on the twiki page (http://www.nysbc.net/procedures/allhours.htm).

To signup:

  1. Register at: http://www.nysbc.org/em-signup.
  2. Mail rice@nysbc.org and request booking access to desired resources. (Tecnai F20, JEOL 1230, high pressure freezer, etc).

CEM User List

Changed:
<
<
Username Full Name NYFD C-14 NYSBC Trainingdown NYSBC 24-hour Access Approved for All-hours Microscopy
>
>
Username Full Name NYFD C-14 NYSBC Training NYSBC 24-hour Access Approved for All-hours Microscopy
 
kderr@nysbc.org KD Derr X X X X
berriman@nysbc.org John Berriman X X X X
stokes@nysbc.org David Stokes X X X X
gowen@nysbc.org Gethin Owen pending X    
rice@nysbc.org Bill Rice pending X    
acehan@saturn.med.nyu.edu Devrim Acehan pending X    
nans@saturn.med.nyu.edu Andrea Nans pending X    
rfetter@rockefeller.edu Richard Fetter        
eva.vanamee@mssm.edu Eva Vanamee        
alexw@sci.ccny.cuny.edu Hui Wei        
jiangq@rockefeller.edu Qiu-Xing Jiang X X X X
Added:
>
>
ghu@saturn.med.nyu.edu Guobin Hu   X    
 
  • Set ALLOWTOPICVIEW =

-- BillRice - 22 Feb 2006

Revision 422 Feb 2006 - Main.BillRice

 
META TOPICPARENT name="CemfacGroup"
Contents

CEM Access Rules

Beginning March 1st we will have new scheduling software. In addition to the new software, there have been some changes to the allotted usage for the Tecnai F20:

  1. Bill Rice will be the new administrator for the booking software (rice@nysbc.org).
  2. The schedule will open up on Monday at noon for the following week.
  3. Signups will be marked as "pending" until Wednesday, when they will be approved.
  4. Users will be allowed to sign up for two daytime blocks (total of 8 hours) in a 2-week period. This means 1 full day every two weeks.
  5. Experienced users are encouraged to get 24 hour access. This entails: permission from John Berriman, NYFD C-14 certification and a special NYSBC training course; instructions are available on the twiki page (http://www.nysbc.net/procedures/allhours.htm).

To signup:

  1. Register at: http://www.nysbc.org/em-signup.
  2. Mail rice@nysbc.org and request booking access to desired resources. (Tecnai F20, JEOL 1230, high pressure freezer, etc).

CEM User List

Username Full Name NYFD C-14 NYSBC Training NYSBC 24-hour Access Approved for All-hours Microscopy
kderr@nysbc.org KD Derr X X X X
berriman@nysbc.org John Berriman X X X X
stokes@nysbc.org David Stokes X X X X
gowen@nysbc.org Gethin Owen pending X    
rice@nysbc.org Bill Rice pending X    
acehan@saturn.med.nyu.edu Devrim Acehan pending X    
nans@saturn.med.nyu.edu Andrea Nans pending X    
rfetter@rockefeller.edu Richard Fetter        
eva.vanamee@mssm.edu Eva Vanamee        
alexw@sci.ccny.cuny.edu Hui Wei        
Changed:
<
<
jiangq@rockefeller.edu Qiu-Xing Jiang        
>
>
jiangq@rockefeller.edu Qiu-Xing Jiang X X X X
 
  • Set ALLOWTOPICVIEW =

-- BillRice - 22 Feb 2006

Revision 322 Feb 2006 - Main.BillRice

 
META TOPICPARENT name="CemfacGroup"
Contents

CEM Access Rules

Beginning March 1st we will have new scheduling software. In addition to the new software, there have been some changes to the allotted usage for the Tecnai F20:

  1. Bill Rice will be the new administrator for the booking software (rice@nysbc.org).
  2. The schedule will open up on Monday at noon for the following week.
  3. Signups will be marked as "pending" until Wednesday, when they will be approved.
  4. Users will be allowed to sign up for two daytime blocks (total of 8 hours) in a 2-week period. This means 1 full day every two weeks.
  5. Experienced users are encouraged to get 24 hour access. This entails: permission from John Berriman, NYFD C-14 certification and a special NYSBC training course; instructions are available on the twiki page (http://www.nysbc.net/procedures/allhours.htm).

To signup:

  1. Register at: http://www.nysbc.org/em-signup.
  2. Mail rice@nysbc.org and request booking access to desired resources. (Tecnai F20, JEOL 1230, high pressure freezer, etc).

CEM User List

Username Full Name NYFD C-14 NYSBC Training NYSBC 24-hour Access Approved for All-hours Microscopy
kderr@nysbc.org KD Derr X X X X
berriman@nysbc.org John Berriman X X X X
stokes@nysbc.org David Stokes X X X X
gowen@nysbc.org Gethin Owen pending X    
rice@nysbc.org Bill Rice pending X    
acehan@saturn.med.nyu.edu Devrim Acehan pending X    
nans@saturn.med.nyu.edu Andrea Nans pending X    
rfetter@rockefeller.edu Richard Fetter        
eva.vanamee@mssm.edu Eva Vanamee        
Changed:
<
<
alexw@sci.ccny.cuny.edu Hui Wei        
>
>
alexw@sci.ccny.cuny.edu Hui Wei        
Added:
>
>
jiangq@rockefeller.edu Qiu-Xing Jiang        
 
  • Set ALLOWTOPICVIEW =

-- BillRice - 22 Feb 2006

Revision 222 Feb 2006 - Main.BillRice

 
META TOPICPARENT name="CemfacGroup"
Contents

CEM Access Rules

Beginning March 1st we will have new scheduling software. In addition to the new software, there have been some changes to the allotted usage for the Tecnai F20:

  1. Bill Rice will be the new administrator for the booking software (rice@nysbc.org).
  2. The schedule will open up on Monday at noon for the following week.
  3. Signups will be marked as "pending" until Wednesday, when they will be approved.
  4. Users will be allowed to sign up for two daytime blocks (total of 8 hours) in a 2-week period. This means 1 full day every two weeks.
  5. Experienced users are encouraged to get 24 hour access. This entails: permission from John Berriman, NYFD C-14 certification and a special NYSBC training course; instructions are available on the twiki page (http://www.nysbc.net/procedures/allhours.htm).

To signup:

  1. Register at: http://www.nysbc.org/em-signup.
  2. Mail rice@nysbc.org and request booking access to desired resources. (Tecnai F20, JEOL 1230, high pressure freezer, etc).

CEM User List

Username Full Name NYFD C-14 NYSBC Training NYSBC 24-hour Access Approved for All-hours Microscopy
Changed:
<
<
kderr@nysbc.org KD Derr X X X X
berriman@nysbc.org John Berriman X X X X
stokes@nysbc.org David Stokes X X X X
gowen@nysbc.org Gethin Owen pending X    
rice@nysbc.org Bill Rice pending X    
acehan@saturn.med.nyu.edu Devrim Acehan pending X    
nans@saturn.med.nyu.edu Andrea Nans pending X    
>
>
kderr@nysbc.org KD Derr X X X X
berriman@nysbc.org John Berriman X X X X
stokes@nysbc.org David Stokes X X X X
gowen@nysbc.org Gethin Owen pending X    
rice@nysbc.org Bill Rice pending X    
acehan@saturn.med.nyu.edu Devrim Acehan pending X    
nans@saturn.med.nyu.edu Andrea Nans pending X    
Added:
>
>
rfetter@rockefeller.edu Richard Fetter        
eva.vanamee@mssm.edu Eva Vanamee        
alexw@sci.ccny.cuny.edu Hui Wei        
 
  • Set ALLOWTOPICVIEW =

-- BillRice - 22 Feb 2006

Revision 122 Feb 2006 - Main.BillRice

 
META TOPICPARENT name="CemfacGroup"
Contents

CEM Access Rules

Beginning March 1st we will have new scheduling software. In addition to the new software, there have been some changes to the allotted usage for the Tecnai F20:

  1. Bill Rice will be the new administrator for the booking software (rice@nysbc.org).
  2. The schedule will open up on Monday at noon for the following week.
  3. Signups will be marked as "pending" until Wednesday, when they will be approved.
  4. Users will be allowed to sign up for two daytime blocks (total of 8 hours) in a 2-week period. This means 1 full day every two weeks.
  5. Experienced users are encouraged to get 24 hour access. This entails: permission from John Berriman, NYFD C-14 certification and a special NYSBC training course; instructions are available on the twiki page (http://www.nysbc.net/procedures/allhours.htm).

To signup:

  1. Register at: http://www.nysbc.org/em-signup.
  2. Mail rice@nysbc.org and request booking access to desired resources. (Tecnai F20, JEOL 1230, high pressure freezer, etc).

CEM User List

Username Full Name NYFD C-14 NYSBC Training NYSBC 24-hour Access Approved for All-hours Microscopy
kderr@nysbc.org KD Derr X X X X
berriman@nysbc.org John Berriman X X X X
stokes@nysbc.org David Stokes X X X X
gowen@nysbc.org Gethin Owen pending X    
rice@nysbc.org Bill Rice pending X    
acehan@saturn.med.nyu.edu Devrim Acehan pending X    
nans@saturn.med.nyu.edu Andrea Nans pending X    
  • Set ALLOWTOPICVIEW =

-- BillRice - 22 Feb 2006

View topic  |  History: r12 < r11 < r10 < r9  |  More topic actions...
 
Copyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding this intranet, Send feedback