Difference: JeoL2100Controls (1 vs. 23)

Revision 2309 Aug 2013 - Main.RinkuJain

 
META TOPICPARENT name="Jeol2100Instructions"
Contents

JEOL 2100 Controls, Comparison with Tecnai

Hardware Controls

JEOL Tecnai
BEAM Gun Valve Open (software switch on Tecnai)
OL No equivalent, pressing this on JEOL means Aperture Control buttons control objective lens
OPEN, 1,2,3,4 Objective lens insertion - hardware control on column
4 arrows : X,Y Objective lens movement/alignment hardware control on column
Shift X, Shift Y knobs Beam shift trackball
Def/Stig X, Def/Stig Y knobs Multifunction X,Y knobs
Brightness knob Intensity knob
Spot size knob Spot size +/- buttons
F1 button Screen up, Screen down buttons
Mag/Cam L knob Magnification knob
Obj Focus Course/fine knobs Objective focus knob
Diff Focus knob equivalent to objective focus knob i in diffraction mode
Std Focus Eucentric Focus
Z up, Z down buttons Z -axis up/down buttons
Exp time knob Changes film exposure time
Trackball Goniometer movement trackball

Following buttons control meaning of DEF/STIG X and Y

PLA button Unless you are adusting something, should be lit. No equivalent button on Tecnai.
Image Shift button Means Def/Stig X and Y control image shift, available only under Tecnai software
Cond Stig button Adjust condensor stigmation
Obj Stig button Adjust objective stigHmation

Coarse/Fine

Note that Brightness, Shift X&Y, Def/Stig X&Y, Diff Focus, and movement trackball all have a CRS control button which toggles between coarse and fine adjustments

Magnification modes

  • JEOL has 5 buttons that control the mode you are in:
  • Mag 1, Mag 2: Range from 1500X to 1,000,000X
  • Low Mag: Ranges from 50X to 6000X
  • Can immediately jump betwen different magnifications using these buttons
  • SA DIFF : Press to go to diffraction mode (20 cm to 250 cm)

Software Controls

Changed:
<
<		A list of the most commonly used menus in the software, and where to Trash.findDFdf them
>
>		A list of the most commonly used menus in the software, and where to find them
 
Menudown SubMenu Purpose
  Specimen Position Map of specimen position, memory of saved positions
  Photo Set Film camera properties
  Vacuum Microscope vacuum diagram and values
  Free Lens Free lens control, important for low-dose (MDS) mode
  Lens/Def Memory Needed to set up MDS mode, should be closed when USING MDS
Dialogue High Voltage Control HT status, Emission status, dark current, emission current, Beam valve open/close
Display   A list of windows you have open, lets you bring selected window to top
JEOLS Hex Display Hex values of microscope registers, good to monitor when using microscope
Maintenance ACD/Bake Turn on ACD heat at end of session
Monitor Status status of system -- everything should be blue and Running
Option MDS Low dose system controls
Property Stage Holder type, holder exchange control

  • Set ALLOWTOPICVIEW =

-- BillRice - 02 Nov 2006

Revision 2217 Sep 2008 - Main.DavidCowburn

 
META TOPICPARENT name="Jeol2100Instructions"
Contents

JEOL 2100 Controls, Comparison with Tecnai

Hardware Controls

JEOL Tecnai
BEAM Gun Valve Open (software switch on Tecnai)
OL No equivalent, pressing this on JEOL means Aperture Control buttons control objective lens
OPEN, 1,2,3,4 Objective lens insertion - hardware control on column
4 arrows : X,Y Objective lens movement/alignment hardware control on column
Shift X, Shift Y knobs Beam shift trackball
Def/Stig X, Def/Stig Y knobs Multifunction X,Y knobs
Brightness knob Intensity knob
Spot size knob Spot size +/- buttons
F1 button Screen up, Screen down buttons
Mag/Cam L knob Magnification knob
Obj Focus Course/fine knobs Objective focus knob
Diff Focus knob equivalent to objective focus knob i in diffraction mode
Std Focus Eucentric Focus
Z up, Z down buttons Z -axis up/down buttons
Exp time knob Changes film exposure time
Trackball Goniometer movement trackball

Following buttons control meaning of DEF/STIG X and Y

PLA button Unless you are adusting something, should be lit. No equivalent button on Tecnai.
Image Shift button Means Def/Stig X and Y control image shift, available only under Tecnai software
Cond Stig button Adjust condensor stigmation
Obj Stig button Adjust objective stigHmation

Coarse/Fine

Note that Brightness, Shift X&Y, Def/Stig X&Y, Diff Focus, and movement trackball all have a CRS control button which toggles between coarse and fine adjustments

Magnification modes

  • JEOL has 5 buttons that control the mode you are in:
  • Mag 1, Mag 2: Range from 1500X to 1,000,000X
  • Low Mag: Ranges from 50X to 6000X
  • Can immediately jump betwen different magnifications using these buttons
  • SA DIFF : Press to go to diffraction mode (20 cm to 250 cm)

Software Controls

A list of the most commonly used menus in the software, and where to Trash.findDFdf them

Menu SubMenu Purpose
Dialogue High Voltage Control HT status, Emission status, dark current, emission current, Beam valve open/close
  Specimen Position Map of specimen position, memory of saved positions
  Photo Set Film camera properties
Monitor Status status of system -- everything should be blue and Running
  Vacuum Microscope vacuum diagram and values
Property Stage Holder type, holder exchange control
Option MDS Low dose system controls
  Free Lens Free lens control, important for low-dose (MDS) mode
  Lens/Def Memory Needed to set up MDS mode, should be closed when USING MDS
Maintenance ACD/Bake Turn on ACD heat at end of session
Display   A list of windows you have open, lets you bring selected window to top
JEOLS Hex Display Hex values of microscope registers, good to monitor when using microscope

  • Set ALLOWTOPICVIEW =

-- BillRice - 02 Nov 2006

Revision 2116 Jul 2008 - Main.DavidCowburn

 
META TOPICPARENT name="Jeol2100Instructions"
Contents

JEOL 2100 Controls, Comparison with Tecnai

Hardware Controls

JEOL Tecnai
BEAM Gun Valve Open (software switch on Tecnai)
OL No equivalent, pressing this on JEOL means Aperture Control buttons control objective lens
OPEN, 1,2,3,4 Objective lens insertion - hardware control on column
4 arrows : X,Y Objective lens movement/alignment hardware control on column
Shift X, Shift Y knobs Beam shift trackball
Def/Stig X, Def/Stig Y knobs Multifunction X,Y knobs
Brightness knob Intensity knob
Spot size knob Spot size +/- buttons
F1 button Screen up, Screen down buttons
Mag/Cam L knob Magnification knob
Obj Focus Course/fine knobs Objective focus knob
Diff Focus knob equivalent to objective focus knob i in diffraction mode
Std Focus Eucentric Focus
Z up, Z down buttons Z -axis up/down buttons
Exp time knob Changes film exposure time
Trackball Goniometer movement trackball

Following buttons control meaning of DEF/STIG X and Y

PLA button Unless you are adusting something, should be lit. No equivalent button on Tecnai.
Image Shift button Means Def/Stig X and Y control image shift, available only under Tecnai software
Cond Stig button Adjust condensor stigmation
Obj Stig button Adjust objective stigHmation

Coarse/Fine

Note that Brightness, Shift X&Y, Def/Stig X&Y, Diff Focus, and movement trackball all have a CRS control button which toggles between coarse and fine adjustments

Magnification modes

  • JEOL has 5 buttons that control the mode you are in:
  • Mag 1, Mag 2: Range from 1500X to 1,000,000X
  • Low Mag: Ranges from 50X to 6000X
  • Can immediately jump betwen different magnifications using these buttons
  • SA DIFF : Press to go to diffraction mode (20 cm to 250 cm)

Software Controls

Changed:
<
<		A list of the most commonly used menus in the software, and where to find them
>
>		A list of the most commonly used menus in the software, and where to Trash.findDFdf them
 
Menu SubMenu Purpose
Dialogue High Voltage Control HT status, Emission status, dark current, emission current, Beam valve open/close
  Specimen Position Map of specimen position, memory of saved positions
  Photo Set Film camera properties
Monitor Status status of system -- everything should be blue and Running
  Vacuum Microscope vacuum diagram and values
Property Stage Holder type, holder exchange control
Option MDS Low dose system controls
  Free Lens Free lens control, important for low-dose (MDS) mode
  Lens/Def Memory Needed to set up MDS mode, should be closed when USING MDS
Maintenance ACD/Bake Turn on ACD heat at end of session
Display   A list of windows you have open, lets you bring selected window to top
JEOLS Hex Display Hex values of microscope registers, good to monitor when using microscope

  • Set ALLOWTOPICVIEW =

-- BillRice - 02 Nov 2006

Revision 2008 Nov 2006 - Main.BillRice

 
META TOPICPARENT name="Jeol2100Instructions"
Contents

JEOL 2100 Controls, Comparison with Tecnai

Hardware Controls

JEOL Tecnai
BEAM Gun Valve Open (software switch on Tecnai)
OL No equivalent, pressing this on JEOL means Aperture Control buttons control objective lens
OPEN, 1,2,3,4 Objective lens insertion - hardware control on column
4 arrows : X,Y Objective lens movement/alignment hardware control on column
Shift X, Shift Y knobs Beam shift trackball
Changed:
<
<
Def/Stig X, Def/Stig Y knobs Multifunction X,Y controls
>
>
Def/Stig X, Def/Stig Y knobs Multifunction X,Y knobs
 
Brightness knob Intensity knob
Spot size knob Spot size +/- buttons
F1 button Screen up, Screen down buttons
Mag/Cam L knob Magnification knob
Obj Focus Course/fine knobs Objective focus knob
Diff Focus knob equivalent to objective focus knob i in diffraction mode
Changed:
<
<
Std Focus No equivalent (?). Sets microscope defocus to 0
Z up, Z down buttons Z up/down buttons
>
>
Std Focus Eucentric Focus
Z up, Z down buttons Z -axis up/down buttons
 
Exp time knob Changes film exposure time
Trackball Goniometer movement trackball

Following buttons control meaning of DEF/STIG X and Y

PLA button Unless you are adusting something, should be lit. No equivalent button on Tecnai.
Image Shift button Means Def/Stig X and Y control image shift, available only under Tecnai software
Cond Stig button Adjust condensor stigmation
Obj Stig button Adjust objective stigHmation

Coarse/Fine

Note that Brightness, Shift X&Y, Def/Stig X&Y, Diff Focus, and movement trackball all have a CRS control button which toggles between coarse and fine adjustments

Magnification modes

  • JEOL has 5 buttons that control the mode you are in:
  • Mag 1, Mag 2: Range from 1500X to 1,000,000X
  • Low Mag: Ranges from 50X to 6000X
  • Can immediately jump betwen different magnifications using these buttons
  • SA DIFF : Press to go to diffraction mode (20 cm to 250 cm)

Software Controls

A list of the most commonly used menus in the software, and where to find them

Menu SubMenu Purpose
Dialogue High Voltage Control HT status, Emission status, dark current, emission current, Beam valve open/close
  Specimen Position Map of specimen position, memory of saved positions
  Photo Set Film camera properties
Monitor Status status of system -- everything should be blue and Running
  Vacuum Microscope vacuum diagram and values
Property Stage Holder type, holder exchange control
Option MDS Low dose system controls
  Free Lens Free lens control, important for low-dose (MDS) mode
  Lens/Def Memory Needed to set up MDS mode, should be closed when USING MDS
Maintenance ACD/Bake Turn on ACD heat at end of session
Display   A list of windows you have open, lets you bring selected window to top
JEOLS Hex Display Hex values of microscope registers, good to monitor when using microscope

  • Set ALLOWTOPICVIEW =

-- BillRice - 02 Nov 2006

Revision 1907 Nov 2006 - Main.BillRice

 
META TOPICPARENT name="Jeol2100Instructions"
Contents

JEOL 2100 Controls, Comparison with Tecnai

Hardware Controls

JEOL Tecnai
BEAM Gun Valve Open (software switch on Tecnai)
OL No equivalent, pressing this on JEOL means Aperture Control buttons control objective lens
OPEN, 1,2,3,4 Objective lens insertion - hardware control on column
4 arrows : X,Y Objective lens movement/alignment hardware control on column
Shift X, Shift Y knobs Beam shift trackball
Def/Stig X, Def/Stig Y knobs Multifunction X,Y controls
Changed:
<
<
Brightness knob Brightness knob
Spot size knob Spot size knob
>
>
Brightness knob Intensity knob
Spot size knob Spot size +/- buttons
 
F1 button Screen up, Screen down buttons
Mag/Cam L knob Magnification knob
Obj Focus Course/fine knobs Objective focus knob
Diff Focus knob equivalent to objective focus knob i in diffraction mode
Std Focus No equivalent (?). Sets microscope defocus to 0
Changed:
<
<
Z up, Z down buttons Adjust Z height of specimen
>
>
Z up, Z down buttons Z up/down buttons
 
Exp time knob Changes film exposure time
Trackball Goniometer movement trackball

Following buttons control meaning of DEF/STIG X and Y

PLA button Unless you are adusting something, should be lit. No equivalent button on Tecnai.
Image Shift button Means Def/Stig X and Y control image shift, available only under Tecnai software
Cond Stig button Adjust condensor stigmation
Obj Stig button Adjust objective stigHmation

Coarse/Fine

Note that Brightness, Shift X&Y, Def/Stig X&Y, Diff Focus, and movement trackball all have a CRS control button which toggles between coarse and fine adjustments

Magnification modes

  • JEOL has 5 buttons that control the mode you are in:
  • Mag 1, Mag 2: Range from 1500X to 1,000,000X
  • Low Mag: Ranges from 50X to 6000X
  • Can immediately jump betwen different magnifications using these buttons
  • SA DIFF : Press to go to diffraction mode (20 cm to 250 cm)

Software Controls

A list of the most commonly used menus in the software, and where to find them

Menu SubMenu Purpose
Dialogue High Voltage Control HT status, Emission status, dark current, emission current, Beam valve open/close
  Specimen Position Map of specimen position, memory of saved positions
  Photo Set Film camera properties
Monitor Status status of system -- everything should be blue and Running
  Vacuum Microscope vacuum diagram and values
Property Stage Holder type, holder exchange control
Option MDS Low dose system controls
  Free Lens Free lens control, important for low-dose (MDS) mode
  Lens/Def Memory Needed to set up MDS mode, should be closed when USING MDS
Maintenance ACD/Bake Turn on ACD heat at end of session
Display   A list of windows you have open, lets you bring selected window to top
JEOLS Hex Display Hex values of microscope registers, good to monitor when using microscope

  • Set ALLOWTOPICVIEW =

-- BillRice - 02 Nov 2006

Revision 1802 Nov 2006 - Main.BillRice

 
META TOPICPARENT name="Jeol2100Instructions"
Contents

JEOL 2100 Controls, Comparison with Tecnai

Hardware Controls

JEOL Tecnai
BEAM Gun Valve Open (software switch on Tecnai)
OL No equivalent, pressing this on JEOL means Aperture Control buttons control objective lens
OPEN, 1,2,3,4 Objective lens insertion - hardware control on column
4 arrows : X,Y Objective lens movement/alignment hardware control on column
Shift X, Shift Y knobs Beam shift trackball
Def/Stig X, Def/Stig Y knobs Multifunction X,Y controls
Brightness knob Brightness knob
Spot size knob Spot size knob
F1 button Screen up, Screen down buttons
Mag/Cam L knob Magnification knob
Obj Focus Course/fine knobs Objective focus knob
Diff Focus knob equivalent to objective focus knob i in diffraction mode
Std Focus No equivalent (?). Sets microscope defocus to 0
Z up, Z down buttons Adjust Z height of specimen
Exp time knob Changes film exposure time
Trackball Goniometer movement trackball

Following buttons control meaning of DEF/STIG X and Y

PLA button Unless you are adusting something, should be lit. No equivalent button on Tecnai.
Image Shift button Means Def/Stig X and Y control image shift, available only under Tecnai software
Cond Stig button Adjust condensor stigmation
Obj Stig button Adjust objective stigHmation

Coarse/Fine

Note that Brightness, Shift X&Y, Def/Stig X&Y, Diff Focus, and movement trackball all have a CRS control button which toggles between coarse and fine adjustments

Added:
>
>

Magnification modes

  • JEOL has 5 buttons that control the mode you are in:
  • Mag 1, Mag 2: Range from 1500X to 1,000,000X
  • Low Mag: Ranges from 50X to 6000X
  • Can immediately jump betwen different magnifications using these buttons
  • SA DIFF : Press to go to diffraction mode (20 cm to 250 cm)
 

Software Controls

A list of the most commonly used menus in the software, and where to find them

Menu SubMenu Purpose
Dialogue High Voltage Control HT status, Emission status, dark current, emission current, Beam valve open/close
  Specimen Position Map of specimen position, memory of saved positions
  Photo Set Film camera properties
Monitor Status status of system -- everything should be blue and Running
  Vacuum Microscope vacuum diagram and values
Property Stage Holder type, holder exchange control
Option MDS Low dose system controls
  Free Lens Free lens control, important for low-dose (MDS) mode
  Lens/Def Memory Needed to set up MDS mode, should be closed when USING MDS
Maintenance ACD/Bake Turn on ACD heat at end of session
Display   A list of windows you have open, lets you bring selected window to top
JEOLS Hex Display Hex values of microscope registers, good to monitor when using microscope

  • Set ALLOWTOPICVIEW =

-- BillRice - 02 Nov 2006

Revision 1702 Nov 2006 - Main.BillRice

 
META TOPICPARENT name="Jeol2100Instructions"
Contents

JEOL 2100 Controls, Comparison with Tecnai

Hardware Controls

JEOL Tecnai
BEAM Gun Valve Open (software switch on Tecnai)
OL No equivalent, pressing this on JEOL means Aperture Control buttons control objective lens
OPEN, 1,2,3,4 Objective lens insertion - hardware control on column
4 arrows : X,Y Objective lens movement/alignment hardware control on column
Shift X, Shift Y knobs Beam shift trackball
Def/Stig X, Def/Stig Y knobs Multifunction X,Y controls
Brightness knob Brightness knob
Spot size knob Spot size knob
F1 button Screen up, Screen down buttons
Mag/Cam L knob Magnification knob
Obj Focus Course/fine knobs Objective focus knob
Diff Focus knob equivalent to objective focus knob i in diffraction mode
Std Focus No equivalent (?). Sets microscope defocus to 0
Z up, Z down buttons Adjust Z height of specimen
Exp time knob Changes film exposure time
Trackball Goniometer movement trackball

Following buttons control meaning of DEF/STIG X and Y

PLA button Unless you are adusting something, should be lit. No equivalent button on Tecnai.
Image Shift button Means Def/Stig X and Y control image shift, available only under Tecnai software
Cond Stig button Adjust condensor stigmation
Obj Stig button Adjust objective stigHmation

Coarse/Fine

Note that Brightness, Shift X&Y, Def/Stig X&Y, Diff Focus, and movement trackball all have a CRS control button which toggles between coarse and fine adjustments

Software Controls

A list of the most commonly used menus in the software, and where to find them

Menu SubMenu Purpose
Dialogue High Voltage Control HT status, Emission status, dark current, emission current, Beam valve open/close
  Specimen Position Map of specimen position, memory of saved positions
  Photo Set Film camera properties
Monitor Status status of system -- everything should be blue and Running
  Vacuum Microscope vacuum diagram and values
Property Stage Holder type, holder exchange control
Option MDS Low dose system controls
  Free Lens Free lens control, important for low-dose (MDS) mode
  Lens/Def Memory Needed to set up MDS mode, should be closed when USING MDS
Maintenance ACD/Bake Turn on ACD heat at end of session
Display   A list of windows you have open, lets you bring selected window to top
JEOLS Hex Display Hex values of microscope registers, good to monitor when using microscope

  • Set ALLOWTOPICVIEW =

-- BillRice - 02 Nov 2006

Revision 1602 Nov 2006 - Main.BillRice

 
META TOPICPARENT name="Jeol2100Instructions"
Contents

JEOL 2100 Controls, Comparison with Tecnai

Hardware Controls

JEOL Tecnai
BEAM Gun Valve Open (software switch on Tecnai)
OL No equivalent, pressing this on JEOL means Aperture Control buttons control objective lens
OPEN, 1,2,3,4 Objective lens insertion - hardware control on column
4 arrows : X,Y Objective lens movement/alignment hardware control on column
Shift X, Shift Y knobs Beam shift trackball
Def/Stig X, Def/Stig Y knobs Multifunction X,Y controls
Brightness knob Brightness knob
Spot size knob Spot size knob
F1 button Screen up, Screen down buttons
Mag/Cam L knob Magnification knob
Obj Focus Course/fine knobs Objective focus knob
Diff Focus knob equivalent to objective focus knob i in diffraction mode
Std Focus No equivalent (?). Sets microscope defocus to 0
Z up, Z down buttons Adjust Z height of specimen
Exp time knob Changes film exposure time
Trackball Goniometer movement trackball
Changed:
<
<

Following buttons control meaning of DEF/Stig X and Y

PLA button Unless you are adusting something, should be lit. No equivalent button on Tecnai.
>
>

Following buttons control meaning of DEF/STIG X and Y

PLA button Unless you are adusting something, should be lit. No equivalent button on Tecnai.
 
Image Shift button Means Def/Stig X and Y control image shift, available only under Tecnai software
Changed:
<
<
Cond Stig button Adjust condensor stigmation
Obj Stig button Adjust objective stigHmation
>
>
Cond Stig button Adjust condensor stigmation
Obj Stig button Adjust objective stigHmation
 

Coarse/Fine

Note that Brightness, Shift X&Y, Def/Stig X&Y, Diff Focus, and movement trackball all have a CRS control button which toggles between coarse and fine adjustments

Software Controls

A list of the most commonly used menus in the software, and where to find them

Menu SubMenu Purpose
Dialogue High Voltage Control HT status, Emission status, dark current, emission current, Beam valve open/close
  Specimen Position Map of specimen position, memory of saved positions
  Photo Set Film camera properties
Monitor Status status of system -- everything should be blue and Running
  Vacuum Microscope vacuum diagram and values
Property Stage Holder type, holder exchange control
Option MDS Low dose system controls
  Free Lens Free lens control, important for low-dose (MDS) mode
  Lens/Def Memory Needed to set up MDS mode, should be closed when USING MDS
Maintenance ACD/Bake Turn on ACD heat at end of session
Display   A list of windows you have open, lets you bring selected window to top
JEOLS Hex Display Hex values of microscope registers, good to monitor when using microscope

  • Set ALLOWTOPICVIEW =

-- BillRice - 02 Nov 2006

Revision 1502 Nov 2006 - Main.BillRice

 
META TOPICPARENT name="Jeol2100Instructions"
Contents

JEOL 2100 Controls, Comparison with Tecnai

Hardware Controls

JEOL Tecnai
BEAM Gun Valve Open (software switch on Tecnai)
OL No equivalent, pressing this on JEOL means Aperture Control buttons control objective lens
OPEN, 1,2,3,4 Objective lens insertion - hardware control on column
4 arrows : X,Y Objective lens movement/alignment hardware control on column
Shift X, Shift Y knobs Beam shift trackball
Def/Stig X, Def/Stig Y knobs Multifunction X,Y controls
Brightness knob Brightness knob
Spot size knob Spot size knob
F1 button Screen up, Screen down buttons
Mag/Cam L knob Magnification knob
Obj Focus Course/fine knobs Objective focus knob
Diff Focus knob equivalent to objective focus knob i in diffraction mode
Added:
>
>
Std Focus No equivalent (?). Sets microscope defocus to 0
Z up, Z down buttons Adjust Z height of specimen
 
Exp time knob Changes film exposure time
Trackball Goniometer movement trackball

Following buttons control meaning of DEF/Stig X and Y

PLA button Unless you are adusting something, should be lit. No equivalent button on Tecnai.
Image Shift button Means Def/Stig X and Y control image shift, available only under Tecnai software
Cond Stig button Adjust condensor stigmation
Obj Stig button Adjust objective stigHmation

Coarse/Fine

Note that Brightness, Shift X&Y, Def/Stig X&Y, Diff Focus, and movement trackball all have a CRS control button which toggles between coarse and fine adjustments

Software Controls

A list of the most commonly used menus in the software, and where to find them

Menu SubMenu Purpose
Dialogue High Voltage Control HT status, Emission status, dark current, emission current, Beam valve open/close
  Specimen Position Map of specimen position, memory of saved positions
  Photo Set Film camera properties
Monitor Status status of system -- everything should be blue and Running
  Vacuum Microscope vacuum diagram and values
Property Stage Holder type, holder exchange control
Option MDS Low dose system controls
  Free Lens Free lens control, important for low-dose (MDS) mode
  Lens/Def Memory Needed to set up MDS mode, should be closed when USING MDS
Maintenance ACD/Bake Turn on ACD heat at end of session
Display   A list of windows you have open, lets you bring selected window to top
JEOLS Hex Display Hex values of microscope registers, good to monitor when using microscope

  • Set ALLOWTOPICVIEW =

-- BillRice - 02 Nov 2006

Revision 1402 Nov 2006 - Main.BillRice

 
META TOPICPARENT name="Jeol2100Instructions"
Contents

JEOL 2100 Controls, Comparison with Tecnai

Hardware Controls

JEOL Tecnai
BEAM Gun Valve Open (software switch on Tecnai)
Changed:
<
<
OL No equivalent, pressing this on JEOL means buttons below control objective lens
>
>
OL No equivalent, pressing this on JEOL means Aperture Control buttons control objective lens
 
OPEN, 1,2,3,4 Objective lens insertion - hardware control on column
4 arrows : X,Y Objective lens movement/alignment hardware control on column
Shift X, Shift Y knobs Beam shift trackball
Changed:
<
<
Def/Stig X, Def/Stig Y knobs Multifunction X,Y controls
>
>
Def/Stig X, Def/Stig Y knobs Multifunction X,Y controls
 
Brightness knob Brightness knob
Spot size knob Spot size knob
F1 button Screen up, Screen down buttons
Mag/Cam L knob Magnification knob
Obj Focus Course/fine knobs Objective focus knob
Diff Focus knob equivalent to objective focus knob i in diffraction mode
Exp time knob Changes film exposure time
Trackball Goniometer movement trackball

Following buttons control meaning of DEF/Stig X and Y

PLA button Unless you are adusting something, should be lit. No equivalent button on Tecnai.
Image Shift button Means Def/Stig X and Y control image shift, available only under Tecnai software
Cond Stig button Adjust condensor stigmation
Obj Stig button Adjust objective stigHmation

Coarse/Fine

Note that Brightness, Shift X&Y, Def/Stig X&Y, Diff Focus, and movement trackball all have a CRS control button which toggles between coarse and fine adjustments

Software Controls

A list of the most commonly used menus in the software, and where to find them

Menu SubMenu Purpose
Dialogue High Voltage Control HT status, Emission status, dark current, emission current, Beam valve open/close
  Specimen Position Map of specimen position, memory of saved positions
  Photo Set Film camera properties
Monitor Status status of system -- everything should be blue and Running
  Vacuum Microscope vacuum diagram and values
Property Stage Holder type, holder exchange control
Option MDS Low dose system controls
  Free Lens Free lens control, important for low-dose (MDS) mode
  Lens/Def Memory Needed to set up MDS mode, should be closed when USING MDS
Maintenance ACD/Bake Turn on ACD heat at end of session
Display   A list of windows you have open, lets you bring selected window to top
JEOLS Hex Display Hex values of microscope registers, good to monitor when using microscope

  • Set ALLOWTOPICVIEW =

-- BillRice - 02 Nov 2006

Revision 1302 Nov 2006 - Main.BillRice

 
META TOPICPARENT name="Jeol2100Instructions"
Contents

JEOL 2100 Controls, Comparison with Tecnai

Hardware Controls

JEOL Tecnai
BEAM Gun Valve Open (software switch on Tecnai)
OL No equivalent, pressing this on JEOL means buttons below control objective lens
OPEN, 1,2,3,4 Objective lens insertion - hardware control on column
4 arrows : X,Y Objective lens movement/alignment hardware control on column
Shift X, Shift Y knobs Beam shift trackball
Def/Stig X, Def/Stig Y knobs Multifunction X,Y controls
Brightness knob Brightness knob
Spot size knob Spot size knob
F1 button Screen up, Screen down buttons
Mag/Cam L knob Magnification knob
Obj Focus Course/fine knobs Objective focus knob
Diff Focus knob equivalent to objective focus knob i in diffraction mode
Exp time knob Changes film exposure time
Trackball Goniometer movement trackball

Following buttons control meaning of DEF/Stig X and Y

PLA button Unless you are adusting something, should be lit. No equivalent button on Tecnai.
Image Shift button Means Def/Stig X and Y control image shift, available only under Tecnai software
Cond Stig button Adjust condensor stigmation
Obj Stig button Adjust objective stigHmation

Coarse/Fine

Note that Brightness, Shift X&Y, Def/Stig X&Y, Diff Focus, and movement trackball all have a CRS control button which toggles between coarse and fine adjustments

Software Controls

A list of the most commonly used menus in the software, and where to find them

Menu SubMenu Purpose
Dialogue High Voltage Control HT status, Emission status, dark current, emission current, Beam valve open/close
  Specimen Position Map of specimen position, memory of saved positions
  Photo Set Film camera properties
Monitor Status status of system -- everything should be blue and Running
  Vacuum Microscope vacuum diagram and values
Property Stage Holder type, holder exchange control
Option MDS Low dose system controls
  Free Lens Free lens control, important for low-dose (MDS) mode
  Lens/Def Memory Needed to set up MDS mode, should be closed when USING MDS
Changed:
<
<
Maintenance ACD/Bake Turn on ACD heat at end of session
>
>
Maintenance ACD/Bake Turn on ACD heat at end of session
 
Display   A list of windows you have open, lets you bring selected window to top
JEOLS Hex Display Hex values of microscope registers, good to monitor when using microscope

  • Set ALLOWTOPICVIEW =

-- BillRice - 02 Nov 2006

Revision 1202 Nov 2006 - Main.BillRice

 
META TOPICPARENT name="Jeol2100Instructions"
Contents

JEOL 2100 Controls, Comparison with Tecnai

Hardware Controls

JEOL Tecnai
BEAM Gun Valve Open (software switch on Tecnai)
OL No equivalent, pressing this on JEOL means buttons below control objective lens
OPEN, 1,2,3,4 Objective lens insertion - hardware control on column
4 arrows : X,Y Objective lens movement/alignment hardware control on column
Shift X, Shift Y knobs Beam shift trackball
Def/Stig X, Def/Stig Y knobs Multifunction X,Y controls
Brightness knob Brightness knob
Spot size knob Spot size knob
F1 button Screen up, Screen down buttons
Mag/Cam L knob Magnification knob
Obj Focus Course/fine knobs Objective focus knob
Diff Focus knob equivalent to objective focus knob i in diffraction mode
Exp time knob Changes film exposure time
Trackball Goniometer movement trackball

Following buttons control meaning of DEF/Stig X and Y

PLA button Unless you are adusting something, should be lit. No equivalent button on Tecnai.
Image Shift button Means Def/Stig X and Y control image shift, available only under Tecnai software
Cond Stig button Adjust condensor stigmation
Obj Stig button Adjust objective stigHmation

Coarse/Fine

Note that Brightness, Shift X&Y, Def/Stig X&Y, Diff Focus, and movement trackball all have a CRS control button which toggles between coarse and fine adjustments

Software Controls

A list of the most commonly used menus in the software, and where to find them

Menu SubMenu Purpose
Dialogue High Voltage Control HT status, Emission status, dark current, emission current, Beam valve open/close
  Specimen Position Map of specimen position, memory of saved positions
  Photo Set Film camera properties
Monitor Status status of system -- everything should be blue and Running
  Vacuum Microscope vacuum diagram and values
Property Stage Holder type, holder exchange control
Option MDS Low dose system controls
  Free Lens Free lens control, important for low-dose (MDS) mode
  Lens/Def Memory Needed to set up MDS mode, should be closed when USING MDS
Changed:
<
<
Maintenance ACD/Bake Turn on ACD heat at end of session
Display   A list of windows you have open, lets you bring selected window to top
>
>
Maintenance ACD/Bake Turn on ACD heat at end of session
Display   A list of windows you have open, lets you bring selected window to top
 
JEOLS Hex Display Hex values of microscope registers, good to monitor when using microscope

  • Set ALLOWTOPICVIEW =

-- BillRice - 02 Nov 2006

Revision 1102 Nov 2006 - Main.BillRice

 
META TOPICPARENT name="Jeol2100Instructions"
Contents

JEOL 2100 Controls, Comparison with Tecnai

Hardware Controls

JEOL Tecnai
BEAM Gun Valve Open (software switch on Tecnai)
OL No equivalent, pressing this on JEOL means buttons below control objective lens
OPEN, 1,2,3,4 Objective lens insertion - hardware control on column
4 arrows : X,Y Objective lens movement/alignment hardware control on column
Shift X, Shift Y knobs Beam shift trackball
Def/Stig X, Def/Stig Y knobs Multifunction X,Y controls
Brightness knob Brightness knob
Spot size knob Spot size knob
F1 button Screen up, Screen down buttons
Mag/Cam L knob Magnification knob
Obj Focus Course/fine knobs Objective focus knob
Diff Focus knob equivalent to objective focus knob i in diffraction mode
Exp time knob Changes film exposure time
Trackball Goniometer movement trackball

Following buttons control meaning of DEF/Stig X and Y

PLA button Unless you are adusting something, should be lit. No equivalent button on Tecnai.
Image Shift button Means Def/Stig X and Y control image shift, available only under Tecnai software
Cond Stig button Adjust condensor stigmation
Obj Stig button Adjust objective stigHmation

Coarse/Fine

Note that Brightness, Shift X&Y, Def/Stig X&Y, Diff Focus, and movement trackball all have a CRS control button which toggles between coarse and fine adjustments

Software Controls

A list of the most commonly used menus in the software, and where to find them

Menu SubMenu Purpose
Changed:
<
<
Dialogue High Voltage Control HT status, Emission status, dark current, emission current, Beam valve open/close
  Specimen Position Map of specimen position, memory of saved positions
  Photo Set Film camera properties
Monitor Status status of system -- everything should be blue and Running
  Vacuum Microscope vacuum diagram and values
Property Stage Holder type, holder exchange control
Option MDS Low dose saystem controls
  Free Lens Free lens control, important for low-dose (MDS) mode
  Lens/Def Memory Needed to set up MDS mode, should be closed when USING MDS
Maintenance ACD/Bake Turn on ACD heat at end of session
Display   A list of windows you have open, lets you bring selected window to top
JEOLS Hex Display Hex values of microscope registers, good to monitor when using microscope
>
>
Dialogue High Voltage Control HT status, Emission status, dark current, emission current, Beam valve open/close
  Specimen Position Map of specimen position, memory of saved positions
  Photo Set Film camera properties
Monitor Status status of system -- everything should be blue and Running
  Vacuum Microscope vacuum diagram and values
Property Stage Holder type, holder exchange control
Option MDS Low dose system controls
  Free Lens Free lens control, important for low-dose (MDS) mode
  Lens/Def Memory Needed to set up MDS mode, should be closed when USING MDS
Maintenance ACD/Bake Turn on ACD heat at end of session
Display   A list of windows you have open, lets you bring selected window to top
JEOLS Hex Display Hex values of microscope registers, good to monitor when using microscope
 

  • Set ALLOWTOPICVIEW =

-- BillRice - 02 Nov 2006

Revision 1002 Nov 2006 - Main.BillRice

 
META TOPICPARENT name="Jeol2100Instructions"
Contents

JEOL 2100 Controls, Comparison with Tecnai

Hardware Controls

JEOL Tecnai
BEAM Gun Valve Open (software switch on Tecnai)
OL No equivalent, pressing this on JEOL means buttons below control objective lens
OPEN, 1,2,3,4 Objective lens insertion - hardware control on column
4 arrows : X,Y Objective lens movement/alignment hardware control on column
Shift X, Shift Y knobs Beam shift trackball
Def/Stig X, Def/Stig Y knobs Multifunction X,Y controls
Brightness knob Brightness knob
Spot size knob Spot size knob
F1 button Screen up, Screen down buttons
Mag/Cam L knob Magnification knob
Obj Focus Course/fine knobs Objective focus knob
Diff Focus knob equivalent to objective focus knob i in diffraction mode
Exp time knob Changes film exposure time
Trackball Goniometer movement trackball

Following buttons control meaning of DEF/Stig X and Y

PLA button Unless you are adusting something, should be lit. No equivalent button on Tecnai.
Image Shift button Means Def/Stig X and Y control image shift, available only under Tecnai software
Cond Stig button Adjust condensor stigmation
Obj Stig button Adjust objective stigHmation

Coarse/Fine

Note that Brightness, Shift X&Y, Def/Stig X&Y, Diff Focus, and movement trackball all have a CRS control button which toggles between coarse and fine adjustments

Software Controls

A list of the most commonly used menus in the software, and where to find them

Menu SubMenu Purpose
Dialogue High Voltage Control HT status, Emission status, dark current, emission current, Beam valve open/close
  Specimen Position Map of specimen position, memory of saved positions
  Photo Set Film camera properties
Monitor Status status of system -- everything should be blue and Running
  Vacuum Microscope vacuum diagram and values
Changed:
<
<
Property Stage Holder type, holder exchange control
>
>
Property Stage Holder type, holder exchange control
 
Option MDS Low dose saystem controls
  Free Lens Free lens control, important for low-dose (MDS) mode
  Lens/Def Memory Needed to set up MDS mode, should be closed when USING MDS
Maintenance ACD/Bake Turn on ACD heat at end of session
Display   A list of windows you have open, lets you bring selected window to top
JEOLS Hex Display Hex values of microscope registers, good to monitor when using microscope

  • Set ALLOWTOPICVIEW =

-- BillRice - 02 Nov 2006

Revision 902 Nov 2006 - Main.BillRice

 
META TOPICPARENT name="Jeol2100Instructions"
Contents

JEOL 2100 Controls, Comparison with Tecnai

Hardware Controls

JEOL Tecnai
BEAM Gun Valve Open (software switch on Tecnai)
OL No equivalent, pressing this on JEOL means buttons below control objective lens
OPEN, 1,2,3,4 Objective lens insertion - hardware control on column
4 arrows : X,Y Objective lens movement/alignment hardware control on column
Shift X, Shift Y knobs Beam shift trackball
Def/Stig X, Def/Stig Y knobs Multifunction X,Y controls
Brightness knob Brightness knob
Spot size knob Spot size knob
F1 button Screen up, Screen down buttons
Mag/Cam L knob Magnification knob
Obj Focus Course/fine knobs Objective focus knob
Diff Focus knob equivalent to objective focus knob i in diffraction mode
Exp time knob Changes film exposure time
Trackball Goniometer movement trackball

Following buttons control meaning of DEF/Stig X and Y

PLA button Unless you are adusting something, should be lit. No equivalent button on Tecnai.
Image Shift button Means Def/Stig X and Y control image shift, available only under Tecnai software
Cond Stig button Adjust condensor stigmation
Obj Stig button Adjust objective stigHmation

Coarse/Fine

Note that Brightness, Shift X&Y, Def/Stig X&Y, Diff Focus, and movement trackball all have a CRS control button which toggles between coarse and fine adjustments

Software Controls

A list of the most commonly used menus in the software, and where to find them

Menu SubMenu Purpose
Changed:
<
<
Dialogue High Voltage Control HT status, Emission status, dark current, emission current, Beam valve open/close
>
>
Dialogue High Voltage Control HT status, Emission status, dark current, emission current, Beam valve open/close
 
  Specimen Position Map of specimen position, memory of saved positions
  Photo Set Film camera properties
Changed:
<
<
Monitor Status status of system -- everything should be blue and Running
>
>
Monitor Status status of system -- everything should be blue and Running
 
  Vacuum Microscope vacuum diagram and values
Changed:
<
<
Property Stage Holder type, holder exchange control
Option MDS Low dose saystem controls
>
>
Property Stage Holder type, holder exchange control
Option MDS Low dose saystem controls
 
  Free Lens Free lens control, important for low-dose (MDS) mode
  Lens/Def Memory Needed to set up MDS mode, should be closed when USING MDS
Changed:
<
<
Maintenance ACD/Bake Turn on ACD heat at end of session
Display   A list of windows you have open, lets you bring selected window to top
JEOLS Hex Display Hex values of microscope registers, good to monitor when using microscope
>
>
Maintenance ACD/Bake Turn on ACD heat at end of session
Display   A list of windows you have open, lets you bring selected window to top
JEOLS Hex Display Hex values of microscope registers, good to monitor when using microscope
 

  • Set ALLOWTOPICVIEW =

-- BillRice - 02 Nov 2006

Revision 802 Nov 2006 - Main.BillRice

 
META TOPICPARENT name="Jeol2100Instructions"
Contents

JEOL 2100 Controls, Comparison with Tecnai

Hardware Controls

JEOL Tecnai
BEAM Gun Valve Open (software switch on Tecnai)
OL No equivalent, pressing this on JEOL means buttons below control objective lens
OPEN, 1,2,3,4 Objective lens insertion - hardware control on column
4 arrows : X,Y Objective lens movement/alignment hardware control on column
Shift X, Shift Y knobs Beam shift trackball
Def/Stig X, Def/Stig Y knobs Multifunction X,Y controls
Brightness knob Brightness knob
Spot size knob Spot size knob
F1 button Screen up, Screen down buttons
Mag/Cam L knob Magnification knob
Obj Focus Course/fine knobs Objective focus knob
Diff Focus knob equivalent to objective focus knob i in diffraction mode
Exp time knob Changes film exposure time
Trackball Goniometer movement trackball

Following buttons control meaning of DEF/Stig X and Y

PLA button Unless you are adusting something, should be lit. No equivalent button on Tecnai.
Image Shift button Means Def/Stig X and Y control image shift, available only under Tecnai software
Cond Stig button Adjust condensor stigmation
Obj Stig button Adjust objective stigHmation

Coarse/Fine

Note that Brightness, Shift X&Y, Def/Stig X&Y, Diff Focus, and movement trackball all have a CRS control button which toggles between coarse and fine adjustments

Software Controls

A list of the most commonly used menus in the software, and where to find them

Menu SubMenu Purpose
Dialogue High Voltage Control HT status, Emission status, dark current, emission current, Beam valve open/close
  Specimen Position Map of specimen position, memory of saved positions
  Photo Set Film camera properties
Monitor Status status of system -- everything should be blue and Running
  Vacuum Microscope vacuum diagram and values
Property Stage Holder type, holder exchange control
Option MDS Low dose saystem controls
  Free Lens Free lens control, important for low-dose (MDS) mode
  Lens/Def Memory Needed to set up MDS mode, should be closed when USING MDS
Maintenance ACD/Bake Turn on ACD heat at end of session
Changed:
<
<
Display A list of windows you have open, lets you bring selected window to top
JEOLS Hex Display Hex values of microscope registers, good to monitor when using microscope
>
>
Display   A list of windows you have open, lets you bring selected window to top
JEOLS Hex Display Hex values of microscope registers, good to monitor when using microscope
 

  • Set ALLOWTOPICVIEW =

-- BillRice - 02 Nov 2006

Revision 702 Nov 2006 - Main.BillRice

 
META TOPICPARENT name="Jeol2100Instructions"
Contents

JEOL 2100 Controls, Comparison with Tecnai

Hardware Controls

JEOL Tecnai
BEAM Gun Valve Open (software switch on Tecnai)
OL No equivalent, pressing this on JEOL means buttons below control objective lens
OPEN, 1,2,3,4 Objective lens insertion - hardware control on column
4 arrows : X,Y Objective lens movement/alignment hardware control on column
Shift X, Shift Y knobs Beam shift trackball
Def/Stig X, Def/Stig Y knobs Multifunction X,Y controls
Brightness knob Brightness knob
Spot size knob Spot size knob
F1 button Screen up, Screen down buttons
Mag/Cam L knob Magnification knob
Obj Focus Course/fine knobs Objective focus knob
Diff Focus knob equivalent to objective focus knob i in diffraction mode
Exp time knob Changes film exposure time
Trackball Goniometer movement trackball
Changed:
<
<
  • Following buttons control meaning of DEF/Stig X and Y
>
>

Following buttons control meaning of DEF/Stig X and Y

 
PLA button Unless you are adusting something, should be lit. No equivalent button on Tecnai.
Image Shift button Means Def/Stig X and Y control image shift, available only under Tecnai software
Cond Stig button Adjust condensor stigmation
Obj Stig button Adjust objective stigHmation
Changed:
<
<		* Coarse/Fine - Note that Brightness, Shift X&Y, Def/Stig X&Y, Diff Focus, and movement trackball all have a CRS control button which toggles between coarse and fine adjustments
>
>

Coarse/Fine

Added:
>
>		Note that Brightness, Shift X&Y, Def/Stig X&Y, Diff Focus, and movement trackball all have a CRS control button which toggles between coarse and fine adjustments
 

Software Controls

A list of the most commonly used menus in the software, and where to find them

Menu SubMenu Purpose
Dialogue High Voltage Control HT status, Emission status, dark current, emission current, Beam valve open/close
  Specimen Position Map of specimen position, memory of saved positions
  Photo Set Film camera properties
Monitor Status status of system -- everything should be blue and Running
  Vacuum Microscope vacuum diagram and values
Property Stage Holder type, holder exchange control
Option MDS Low dose saystem controls
  Free Lens Free lens control, important for low-dose (MDS) mode
  Lens/Def Memory Needed to set up MDS mode, should be closed when USING MDS
Maintenance ACD/Bake Turn on ACD heat at end of session
Display A list of windows you have open, lets you bring selected window to top
JEOLS Hex Display Hex values of microscope registers, good to monitor when using microscope

  • Set ALLOWTOPICVIEW =

-- BillRice - 02 Nov 2006

Revision 602 Nov 2006 - Main.BillRice

 
META TOPICPARENT name="Jeol2100Instructions"
Contents

JEOL 2100 Controls, Comparison with Tecnai

Hardware Controls

JEOL Tecnai
BEAM Gun Valve Open (software switch on Tecnai)
OL No equivalent, pressing this on JEOL means buttons below control objective lens
OPEN, 1,2,3,4 Objective lens insertion - hardware control on column
4 arrows : X,Y Objective lens movement/alignment hardware control on column
Shift X, Shift Y knobs Beam shift trackball
Def/Stig X, Def/Stig Y knobs Multifunction X,Y controls
Brightness knob Brightness knob
Spot size knob Spot size knob
F1 button Screen up, Screen down buttons
Mag/Cam L knob Magnification knob
Obj Focus Course/fine knobs Objective focus knob
Diff Focus knob equivalent to objective focus knob i in diffraction mode
Exp time knob Changes film exposure time
Trackball Goniometer movement trackball
Changed:
<
<		* Following buttons control meaning of DEF/Stig X and Y
>
>
  • Following buttons control meaning of DEF/Stig X and Y
 
PLA button Unless you are adusting something, should be lit. No equivalent button on Tecnai.
Image Shift button Means Def/Stig X and Y control image shift, available only under Tecnai software
Cond Stig button Adjust condensor stigmation
Obj Stig button Adjust objective stigHmation

* Coarse/Fine - Note that Brightness, Shift X&Y, Def/Stig X&Y, Diff Focus, and movement trackball all have a CRS control button which toggles between coarse and fine adjustments

Software Controls

A list of the most commonly used menus in the software, and where to find them

Menu SubMenu Purpose
Dialogue High Voltage Control HT status, Emission status, dark current, emission current, Beam valve open/close
  Specimen Position Map of specimen position, memory of saved positions
  Photo Set Film camera properties
Monitor Status status of system -- everything should be blue and Running
  Vacuum Microscope vacuum diagram and values
Property Stage Holder type, holder exchange control
Option MDS Low dose saystem controls
  Free Lens Free lens control, important for low-dose (MDS) mode
  Lens/Def Memory Needed to set up MDS mode, should be closed when USING MDS
Maintenance ACD/Bake Turn on ACD heat at end of session
Display A list of windows you have open, lets you bring selected window to top
JEOLS Hex Display Hex values of microscope registers, good to monitor when using microscope

  • Set ALLOWTOPICVIEW =

-- BillRice - 02 Nov 2006

Revision 502 Nov 2006 - Main.BillRice

 
META TOPICPARENT name="Jeol2100Instructions"
Contents

JEOL 2100 Controls, Comparison with Tecnai

Hardware Controls

JEOL Tecnai
BEAM Gun Valve Open (software switch on Tecnai)
Changed:
<
<
OL No equivalent, pressing this on JEOL means buttons below control objective lens
OPEN, 1,2,3,4 Objective lens insertion - hardware control on column
4 arrows : X,Y Objective lens movement/alignment hardware control on column
Shift X, Shift Y knobs Beam shift trackball
>
>
OL No equivalent, pressing this on JEOL means buttons below control objective lens
OPEN, 1,2,3,4 Objective lens insertion - hardware control on column
4 arrows : X,Y Objective lens movement/alignment hardware control on column
Shift X, Shift Y knobs Beam shift trackball
 
Def/Stig X, Def/Stig Y knobs Multifunction X,Y controls
Changed:
<
<
Brightness knob Brightness knob
Spot size knob Spot size knob
F1 button Screen up, Screen down buttons
Mag/Cam L knob Magnification knob
Obj Focus Course/fine knobs Objective focus knob
Diff Focus knob equivalen tto objective focus knob i in diffraction mode
Exp time knob Changes film exposure time
Trackball Goniometer movement trackball
>
>
Brightness knob Brightness knob
Spot size knob Spot size knob
F1 button Screen up, Screen down buttons
Mag/Cam L knob Magnification knob
Obj Focus Course/fine knobs Objective focus knob
Diff Focus knob equivalent to objective focus knob i in diffraction mode
Exp time knob Changes film exposure time
Trackball Goniometer movement trackball
 * Following buttons control meaning of DEF/Stig X and Y
PLA button Unless you are adusting something, should be lit. No equivalent button on Tecnai.
Image Shift button Means Def/Stig X and Y control image shift, available only under Tecnai software
Cond Stig button Adjust condensor stigmation
Obj Stig button Adjust objective stigHmation

* Coarse/Fine - Note that Brightness, Shift X&Y, Def/Stig X&Y, Diff Focus, and movement trackball all have a CRS control button which toggles between coarse and fine adjustments

Software Controls

A list of the most commonly used menus in the software, and where to find them

Menu SubMenu Purpose
Dialogue High Voltage Control HT status, Emission status, dark current, emission current, Beam valve open/close
  Specimen Position Map of specimen position, memory of saved positions
  Photo Set Film camera properties
Monitor Status status of system -- everything should be blue and Running
  Vacuum Microscope vacuum diagram and values
Property Stage Holder type, holder exchange control
Option MDS Low dose saystem controls
  Free Lens Free lens control, important for low-dose (MDS) mode
  Lens/Def Memory Needed to set up MDS mode, should be closed when USING MDS
Maintenance ACD/Bake Turn on ACD heat at end of session
Display A list of windows you have open, lets you bring selected window to top
JEOLS Hex Display Hex values of microscope registers, good to monitor when using microscope

  • Set ALLOWTOPICVIEW =

-- BillRice - 02 Nov 2006

Revision 402 Nov 2006 - Main.BillRice

 
META TOPICPARENT name="Jeol2100Instructions"
Contents

JEOL 2100 Controls, Comparison with Tecnai

Hardware Controls

JEOL Tecnai
BEAM Gun Valve Open (software switch on Tecnai)
OL No equivalent, pressing this on JEOL means buttons below control objective lens
OPEN, 1,2,3,4 Objective lens insertion - hardware control on column
4 arrows : X,Y Objective lens movement/alignment hardware control on column
Shift X, Shift Y knobs Beam shift trackball
Def/Stig X, Def/Stig Y knobs Multifunction X,Y controls
Brightness knob Brightness knob
Spot size knob Spot size knob
F1 button Screen up, Screen down buttons
Mag/Cam L knob Magnification knob
Obj Focus Course/fine knobs Objective focus knob
Diff Focus knob equivalen tto objective focus knob i in diffraction mode
Exp time knob Changes film exposure time
Trackball Goniometer movement trackball

* Following buttons control meaning of DEF/Stig X and Y

PLA button Unless you are adusting something, should be lit. No equivalent button on Tecnai.
Image Shift button Means Def/Stig X and Y control image shift, available only under Tecnai software
Cond Stig button Adjust condensor stigmation
Obj Stig button Adjust objective stigHmation

* Coarse/Fine - Note that Brightness, Shift X&Y, Def/Stig X&Y, Diff Focus, and movement trackball all have a CRS control button which toggles between coarse and fine adjustments

Software Controls

A list of the most commonly used menus in the software, and where to find them
Changed:
<
<
Menu SubMenu? Purpose
>
>
Menu SubMenu Purpose
 
Dialogue High Voltage Control HT status, Emission status, dark current, emission current, Beam valve open/close
  Specimen Position Map of specimen position, memory of saved positions
  Photo Set Film camera properties
Monitor Status status of system -- everything should be blue and Running
  Vacuum Microscope vacuum diagram and values
Property Stage Holder type, holder exchange control
Option MDS Low dose saystem controls
  Free Lens Free lens control, important for low-dose (MDS) mode
  Lens/Def Memory Needed to set up MDS mode, should be closed when USING MDS
Maintenance ACD/Bake Turn on ACD heat at end of session
Display A list of windows you have open, lets you bring selected window to top
JEOLS Hex Display Hex values of microscope registers, good to monitor when using microscope

  • Set ALLOWTOPICVIEW =

-- BillRice - 02 Nov 2006

Revision 302 Nov 2006 - Main.BillRice

 
META TOPICPARENT name="Jeol2100Instructions"
Contents

JEOL 2100 Controls, Comparison with Tecnai

Hardware Controls

Changed:
<
<
JEOL Tecnai
>
>
JEOL Tecnai
 
BEAM Gun Valve Open (software switch on Tecnai)
OL No equivalent, pressing this on JEOL means buttons below control objective lens
OPEN, 1,2,3,4 Objective lens insertion - hardware control on column
4 arrows : X,Y Objective lens movement/alignment hardware control on column
Shift X, Shift Y knobs Beam shift trackball
Def/Stig X, Def/Stig Y knobs Multifunction X,Y controls
Brightness knob Brightness knob
Spot size knob Spot size knob
F1 button Screen up, Screen down buttons
Mag/Cam L knob Magnification knob
Obj Focus Course/fine knobs Objective focus knob
Diff Focus knob equivalen tto objective focus knob i in diffraction mode
Exp time knob Changes film exposure time
Trackball Goniometer movement trackball

* Following buttons control meaning of DEF/Stig X and Y

PLA button Unless you are adusting something, should be lit. No equivalent button on Tecnai.
Image Shift button Means Def/Stig X and Y control image shift, available only under Tecnai software
Cond Stig button Adjust condensor stigmation
Obj Stig button Adjust objective stigHmation

* Coarse/Fine - Note that Brightness, Shift X&Y, Def/Stig X&Y, Diff Focus, and movement trackball all have a CRS control button which toggles between coarse and fine adjustments

Software Controls

A list of the most commonly used menus in the software, and where to find them

Menu SubMenu? Purpose
Dialogue High Voltage Control HT status, Emission status, dark current, emission current, Beam valve open/close
  Specimen Position Map of specimen position, memory of saved positions
  Photo Set Film camera properties
Monitor Status status of system -- everything should be blue and Running
  Vacuum Microscope vacuum diagram and values
Property Stage Holder type, holder exchange control
Option MDS Low dose saystem controls
  Free Lens Free lens control, important for low-dose (MDS) mode
  Lens/Def Memory Needed to set up MDS mode, should be closed when USING MDS
Maintenance ACD/Bake Turn on ACD heat at end of session
Display A list of windows you have open, lets you bring selected window to top
JEOLS Hex Display Hex values of microscope registers, good to monitor when using microscope

  • Set ALLOWTOPICVIEW =

-- BillRice - 02 Nov 2006

Revision 202 Nov 2006 - Main.BillRice

 
META TOPICPARENT name="Jeol2100Instructions"
Contents

JEOL 2100 Controls, Comparison with Tecnai

Hardware Controls

JEOL Tecnai
BEAM Gun Valve Open (software switch on Tecnai)
Changed:
<
<
OL   No equivalent, pressing this on JEOL means buttons below control objective lens
>
>
OL No equivalent, pressing this on JEOL means buttons below control objective lens
 
OPEN, 1,2,3,4 Objective lens insertion - hardware control on column
4 arrows : X,Y Objective lens movement/alignment hardware control on column
Shift X, Shift Y knobs Beam shift trackball
Def/Stig X, Def/Stig Y knobs Multifunction X,Y controls
Brightness knob Brightness knob
Spot size knob Spot size knob
F1 button Screen up, Screen down buttons
Mag/Cam L knob Magnification knob
Obj Focus Course/fine knobs Objective focus knob
Diff Focus knob equivalen tto objective focus knob i in diffraction mode
Exp time knob Changes film exposure time
Trackball Goniometer movement trackball

* Following buttons control meaning of DEF/Stig X and Y

PLA button Unless you are adusting something, should be lit. No equivalent button on Tecnai.
Image Shift button Means Def/Stig X and Y control image shift, available only under Tecnai software
Cond Stig button Adjust condensor stigmation
Obj Stig button Adjust objective stigHmation

* Coarse/Fine - Note that Brightness, Shift X&Y, Def/Stig X&Y, Diff Focus, and movement trackball all have a CRS control button which toggles between coarse and fine adjustments

Software Controls

A list of the most commonly used menus in the software, and where to find them

Menu SubMenu? Purpose
Dialogue High Voltage Control HT status, Emission status, dark current, emission current, Beam valve open/close
  Specimen Position Map of specimen position, memory of saved positions
  Photo Set Film camera properties
Monitor Status status of system -- everything should be blue and Running
  Vacuum Microscope vacuum diagram and values
Property Stage Holder type, holder exchange control
Option MDS Low dose saystem controls
  Free Lens Free lens control, important for low-dose (MDS) mode
  Lens/Def Memory Needed to set up MDS mode, should be closed when USING MDS
Maintenance ACD/Bake Turn on ACD heat at end of session
Display A list of windows you have open, lets you bring selected window to top
JEOLS Hex Display Hex values of microscope registers, good to monitor when using microscope

  • Set ALLOWTOPICVIEW =

-- BillRice - 02 Nov 2006

Revision 102 Nov 2006 - Main.BillRice

 
META TOPICPARENT name="Jeol2100Instructions"
Contents

JEOL 2100 Controls, Comparison with Tecnai

Hardware Controls

JEOL Tecnai
BEAM Gun Valve Open (software switch on Tecnai)
OL   No equivalent, pressing this on JEOL means buttons below control objective lens
OPEN, 1,2,3,4 Objective lens insertion - hardware control on column
4 arrows : X,Y Objective lens movement/alignment hardware control on column
Shift X, Shift Y knobs Beam shift trackball
Def/Stig X, Def/Stig Y knobs Multifunction X,Y controls
Brightness knob Brightness knob
Spot size knob Spot size knob
F1 button Screen up, Screen down buttons
Mag/Cam L knob Magnification knob
Obj Focus Course/fine knobs Objective focus knob
Diff Focus knob equivalen tto objective focus knob i in diffraction mode
Exp time knob Changes film exposure time
Trackball Goniometer movement trackball

* Following buttons control meaning of DEF/Stig X and Y

PLA button Unless you are adusting something, should be lit. No equivalent button on Tecnai.
Image Shift button Means Def/Stig X and Y control image shift, available only under Tecnai software
Cond Stig button Adjust condensor stigmation
Obj Stig button Adjust objective stigHmation

* Coarse/Fine - Note that Brightness, Shift X&Y, Def/Stig X&Y, Diff Focus, and movement trackball all have a CRS control button which toggles between coarse and fine adjustments

Software Controls

A list of the most commonly used menus in the software, and where to find them

Menu SubMenu? Purpose
Dialogue High Voltage Control HT status, Emission status, dark current, emission current, Beam valve open/close
  Specimen Position Map of specimen position, memory of saved positions
  Photo Set Film camera properties
Monitor Status status of system -- everything should be blue and Running
  Vacuum Microscope vacuum diagram and values
Property Stage Holder type, holder exchange control
Option MDS Low dose saystem controls
  Free Lens Free lens control, important for low-dose (MDS) mode
  Lens/Def Memory Needed to set up MDS mode, should be closed when USING MDS
Maintenance ACD/Bake Turn on ACD heat at end of session
Display A list of windows you have open, lets you bring selected window to top
JEOLS Hex Display Hex values of microscope registers, good to monitor when using microscope

  • Set ALLOWTOPICVIEW =

-- BillRice - 02 Nov 2006

View topic  |  History: r23 < r22 < r21 < r20  |  More topic actions...
 
Copyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding this intranet, Send feedback