New User Setup Tecnai F20

• Create new accounts on both computers and Greymatter
• Set passwords to never expire
  • Windows 2000 or XP
    • Must be Administrator
    1. Right-click My Computer
    2. Click Manage
    3. Click to Expand Local Users and Groups
    4. Click Users
    5. Double click account
    6. Select Password Never Expires checkbox

• Set up new users as “TEMexperts” to insure functionality
  • advanced users should also be Power Users. Instructions for multiple groups:
    • Manage Right click My computer --> Manage --> local Users and Groups --> Users--> (highlight name) --> Properties --> "Member of" tab -->Add...

• Remind user to logout and not "shutdown" computers

Tecnai Computer Settings

• Make sure Services is on the desktop

• Tecnai User Interface C:/Tecnai/exe/Peoui.exe

• Put control pad light switch on menu bar – tools/customize tool bar/commands/control pads

TECNAI USER INTERFACE TABS

TECNAI USER INTERFACE LOWER SCREEN PANELS

• TUIpanel.bmp: Tecnai User Interface screen shot

New user Low Dose setup

• • make sure specimen rod is still inserted
    • This will make spot size 2 the default, if rod is out 5 is default.
  • Load known good Low Dose file listed on whiteboard
  • save as new user file and folder

Teitz Software

• Prompted upon opening:
  • User name (first initial and last name)
  • Working directory – P: /
• To place scalebar:
  • scaling/scalebar check "use Scalebar" box
• 8 bit Tiff

Fast Scan Camera Computer

• Turn off auto screen off - right click screen: properties\screen saver\power
• Make background black

Fast Scan Camera:

• Select “firewire” when prompted upon opening camera
• Set speed to 300ms
• To enable flat correction - File\preferences\misc - change C:\program files\... to C:\\tcl\\EMMENU\\tem1000
• Check flat correction box

Serial EM

• Use C drive
• Personal directory
• Settings are local
  • look feel, camera, tilt series
• Make a shortcut
  • Right click icon to make sure *Start in : Change to user directory * Target is correct
    • Okay to adopt others settings

• Load alignments for F20 and assume the calibrations for serial EM are valid.
  • Stress that it is a bad idea to fiddle with alignments
  • FEG registers Alignments
  • User directories
  • C: Technai Data

• Calibrations must be done in admin mode. To save calibrations you must check next to admin in pull down menu. DO not calibrate unless authorized.

• Binning- adds up selected number of pixels and makes them 1. Reduces info. Shortens exposure.

• Focus area- move to bottom of screen so the camera charge will clear.

• 16 Bits- camera reads 0-65000. Prefer to truncate data, anything over 32500 is thrown away.

• Low Dose- when Tecnai is in exposure mode open serial EM low dose and check box. Focus and tracking should be in the same place. The beam in these areas should not overlap record area. Do not normalize beam through view.

• Set ALLOWTOPICVIEW =

-- KdDerr - 04 Oct 2006

New User Setup Tecnai F20

• Create new accounts on both computers and Greymatter
• Set passwords to never expire
  • Windows 2000 or XP
    • Must be Administrator
    1. Right-click My Computer
    2. Click Manage
    3. Click to Expand Local Users and Groups
    4. Click Users
    5. Double click account
    6. Select Password Never Expires checkbox

• Set up new users as “TEMexperts” to insure functionality
  • advanced users should also be Power Users. Instructions for multiple groups:
    • Manage Right click My computer --> Manage --> local Users and Groups --> Users--> (highlight name) --> Properties --> "Member of" tab -->Add...

• Remind user to logout and not "shutdown" computers

Tecnai Computer Settings

• Tecnai User Interface C:/Tecnai/exe/Peoui.exe

• Put control pad light switch on menu bar – tools/customize tool bar/commands/control pads

TECNAI USER INTERFACE TABS

TECNAI USER INTERFACE LOWER SCREEN PANELS

• TUIpanel.bmp: Tecnai User Interface screen shot

New user Low Dose setup

• • make sure specimen rod is still inserted
    • This will make spot size 2 the default, if rod is out 5 is default.
  • Load known good Low Dose file listed on whiteboard
  • save as new user file and folder

Teitz Software

• Prompted upon opening:
  • User name (first initial and last name)
  • Working directory – P: /
• To place scalebar:
  • scaling/scalebar check "use Scalebar" box
• 8 bit Tiff

Fast Scan Camera Computer

• Turn off auto screen off - right click screen: properties\screen saver\power
• Make background black

Fast Scan Camera:

• Select “firewire” when prompted upon opening camera
• Set speed to 300ms
• To enable flat correction - File\preferences\misc - change C:\program files\... to C:\\tcl\\EMMENU\\tem1000
• Check flat correction box

Serial EM

• Use C drive
• Personal directory
• Settings are local
  • look feel, camera, tilt series
• Make a shortcut
  • Right click icon to make sure *Start in : Change to user directory * Target is correct
    • Okay to adopt others settings

• Load alignments for F20 and assume the calibrations for serial EM are valid.
  • Stress that it is a bad idea to fiddle with alignments
  • FEG registers Alignments
  • User directories
  • C: Technai Data

• Calibrations must be done in admin mode. To save calibrations you must check next to admin in pull down menu. DO not calibrate unless authorized.

• Binning- adds up selected number of pixels and makes them 1. Reduces info. Shortens exposure.

• Focus area- move to bottom of screen so the camera charge will clear.

• 16 Bits- camera reads 0-65000. Prefer to truncate data, anything over 32500 is thrown away.

• Low Dose- when Tecnai is in exposure mode open serial EM low dose and check box. Focus and tracking should be in the same place. The beam in these areas should not overlap record area. Do not normalize beam through view.

• Set ALLOWTOPICVIEW =

-- KdDerr - 04 Oct 2006

New User Setup Tecnai F20

• Create new accounts on both computers and Greymatter
• Set passwords to never expire
  • Windows 2000 or XP
    • Must be Administrator
    1. Right-click My Computer
    2. Click Manage
    3. Click to Expand Local Users and Groups
    4. Click Users
    5. Double click account
    6. Select Password Never Expires checkbox

• Set up new users as “TEMexperts” to insure functionality
  • advanced users should also be Power Users. Instructions for multiple groups:
    • Manage Right click My computer --> Manage --> local Users and Groups --> Users--> (highlight name) --> Properties --> "Member of" tab -->Add...

• Remind user to logout and not "shutdown" computers

Tecnai Computer Settings

• Make sure Services is on your desktop Path Programs/Administrative tools/services

• Tecnai User Interface C:/Tecnai/exe/Peoui.exe

• Put control pad light switch on menu bar – tools/customize tool bar/commands/control pads

TECNAI USER INTERFACE TABS

TECNAI USER INTERFACE LOWER SCREEN PANELS

• TUIpanel.bmp: Tecnai User Interface screen shot

New user Low Dose setup

• • make sure specimen rod is still inserted
    • This will make spot size 2 the default, if rod is out 5 is default.
  • Load known good Low Dose file listed on whiteboard
  • save as new user file and folder

Teitz Software

• Prompted upon opening:
  • User name (first initial and last name)
  • Working directory – P: /
• To place scalebar:
  • scaling/scalebar check "use Scalebar" box
• 8 bit Tiff

Fast Scan Camera Computer

• Turn off auto screen off - right click screen: properties\screen saver\power
• Make background black

Fast Scan Camera:

• Select “firewire” when prompted upon opening camera
• Set speed to 300ms

• Check flat correction box

Serial EM

• Use C drive
• Personal directory
• Settings are local
  • look feel, camera, tilt series
• Make a shortcut
  • Right click icon to make sure *Start in : Change to user directory * Target is correct
    • Okay to adopt others settings

• Load alignments for F20 and assume the calibrations for serial EM are valid.
  • Stress that it is a bad idea to fiddle with alignments
  • FEG registers Alignments
  • User directories
  • C: Technai Data

• Calibrations must be done in admin mode. To save calibrations you must check next to admin in pull down menu. DO not calibrate unless authorized.

• Binning- adds up selected number of pixels and makes them 1. Reduces info. Shortens exposure.

• Focus area- move to bottom of screen so the camera charge will clear.

• 16 Bits- camera reads 0-65000. Prefer to truncate data, anything over 32500 is thrown away.

• Low Dose- when Tecnai is in exposure mode open serial EM low dose and check box. Focus and tracking should be in the same place. The beam in these areas should not overlap record area. Do not normalize beam through view.

• Set ALLOWTOPICVIEW =

-- KdDerr - 04 Oct 2006

New User Setup Tecnai F20

• Create new accounts on both computers and Greymatter
• Set passwords to never expire
  • Windows 2000 or XP
    • Must be Administrator
    1. Right-click My Computer
    2. Click Manage
    3. Click to Expand Local Users and Groups
    4. Click Users
    5. Double click account
    6. Select Password Never Expires checkbox

• Set up new users as “TEMexperts” to insure functionality
  • advanced users should also be Power Users. Instructions for multiple groups:
    • Manage Right click My computer --> Manage --> local Users and Groups --> Users--> (highlight name) --> Properties --> "Member of" tab -->Add...

• Remind user to logout and not "shutdown" computers

Tecnai Computer Settings

• Make sure Services is on your desktop Path Programs/Administrative tools/services

• Tecnai User Interface C:/Tecnai/exe/Peoui.exe

• Put control pad light switch on menu bar – tools/customize tool bar/commands/control pads

TECNAI USER INTERFACE TABS

TECNAI USER INTERFACE LOWER SCREEN PANELS

• TUIpanel.bmp: Tecnai User Interface screen shot

Teitz Software

• Prompted upon opening:
  • User name (first initial and last name)
  • Working directory – P: /
• To place scalebar:
  • scaling/scalebar check "use Scalebar" box
• 8 bit Tiff

Fast Scan Camera Computer

• Turn off auto screen off - right click screen: properties\screen saver\power
• Make background black

Fast Scan Camera:

• Select “firewire” when prompted upon opening camera
• Set speed to 300ms
• To enable flat correction - File\preferences\misc - change C:\program files\... to C:\\TVIPS\\tcl\\EMMENU\\tem1000
• Check flat correction box

Serial EM

• Use C drive
• Personal directory
• Settings are local
  • look feel, camera, tilt series
• Make a shortcut
  • Right click icon to make sure *Start in : Change to user directory * Target is correct
    • Okay to adopt others settings

• Load alignments for F20 and assume the calibrations for serial EM are valid.
  • Stress that it is a bad idea to fiddle with alignments
  • FEG registers Alignments
  • User directories
  • C: Technai Data

• Calibrations must be done in admin mode. To save calibrations you must check next to admin in pull down menu. DO not calibrate unless authorized.

• Binning- adds up selected number of pixels and makes them 1. Reduces info. Shortens exposure.

• Focus area- move to bottom of screen so the camera charge will clear.

• 16 Bits- camera reads 0-65000. Prefer to truncate data, anything over 32500 is thrown away.

• Low Dose- when Tecnai is in exposure mode open serial EM low dose and check box. Focus and tracking should be in the same place. The beam in these areas should not overlap record area. Do not normalize beam through view.

• Set ALLOWTOPICVIEW =

-- KdDerr - 04 Oct 2006

New User Setup Tecnai F20

• Create new accounts on both computers and Greymatter
• Set passwords to never expire
  • Windows 2000 or XP
    • Must be Administrator
    1. Right-click My Computer
    2. Click Manage
    3. Click to Expand Local Users and Groups
    4. Click Users
    5. Double click account
    6. Select Password Never Expires checkbox

• Set up new users as “TEMexperts” to insure functionality
  • advanced users should also be Power Users. Instructions for multiple groups:
    • Manage Right click My computer --> Manage --> local Users and Groups --> Users--> (highlight name) --> Properties --> "Member of" tab -->Add...

• Remind user to logout and not "shutdown" computers

Tecnai Computer Settings

• Make sure Services is on your desktop Path Programs/Administrative tools/services

• Tecnai User Interface C:/Tecnai/exe/Peoui.exe

• Put control pad light switch on menu bar – tools/customize tool bar/commands/control pads

TECNAI USER INTERFACE TABS

TECNAI USER INTERFACE LOWER SCREEN PANELS

• TUIpanel.bmp: Tecnai User Interface screen shot

Low Dose setup

Teitz Software

• Prompted upon opening:
  • User name (first initial and last name)
  • Working directory – P: /
• To place scalebar:
  • scaling/scalebar check "use Scalebar" box
• 8 bit Tiff

Fast Scan Camera Computer

• Make background black

Fast Scan Camera:

• Select “firewire” when prompted upon opening camera
• Set speed to 300ms

• Check flat correction box

Serial EM

• Use C drive
• Personal directory
• Settings are local
  • look feel, camera, tilt series
• Make a shortcut
  • Right click icon to make sure *Start in : Change to user directory * Target is correct
    • Okay to adopt others settings

• Load alignments for F20 and assume the calibrations for serial EM are valid.
  • Stress that it is a bad idea to fiddle with alignments
  • FEG registers Alignments
  • User directories
  • C: Technai Data

• Calibrations must be done in admin mode. To save calibrations you must check next to admin in pull down menu. DO not calibrate unless authorized.

• Binning- adds up selected number of pixels and makes them 1. Reduces info. Shortens exposure.

• Focus area- move to bottom of screen so the camera charge will clear.

• 16 Bits- camera reads 0-65000. Prefer to truncate data, anything over 32500 is thrown away.

• Low Dose- when Tecnai is in exposure mode open serial EM low dose and check box. Focus and tracking should be in the same place. The beam in these areas should not overlap record area. Do not normalize beam through view.

• Set ALLOWTOPICVIEW =

-- KdDerr - 04 Oct 2006

New User Setup Tecnai F20

• Create new accounts on both computers and Greymatter
• Set passwords to never expire
  • Windows 2000 or XP
    • Must be Administrator
    1. Right-click My Computer
    2. Click Manage
    3. Click to Expand Local Users and Groups
    4. Click Users
    5. Double click account
    6. Select Password Never Expires checkbox

• Set up new users as “TEMexperts” to insure functionality

• Remind user to logout and not "shutdown" computers

Tecnai Computer Settings

• Make sure Services is on your desktop Path Programs/Administrative tools/services

• Tecnai User Interface C:/Tecnai/exe/Peoui.exe

• Put control pad light switch on menu bar – tools/customize tool bar/commands/control pads

TECNAI USER INTERFACE TABS

TECNAI USER INTERFACE LOWER SCREEN PANELS

• TUIpanel.bmp: Tecnai User Interface screen shot

Low Dose setup

Teitz Software

• Prompted upon opening:
  • User name (first initial and last name)
  • Working directory – P: /
• To place scalebar:
  • scaling/scalebar check "use Scalebar" box
• 8 bit Tiff

Fast Scan Camera Computer

• Turn off auto screen off - right click screen: properties/screen saver/power
• Make background black

Fast Scan Camera:

• Select “firewire” when prompted upon opening camera
• Set speed to 300ms
• To enable flat correction - File/preferences/misc - change C:/program files/ to C:/ TVIPS/
• Check flat correction box

Serial EM

• Use C drive
• Personal directory
• Settings are local
  • look feel, camera, tilt series
• Make a shortcut
  • Right click icon to make sure *Start in : Change to user directory * Target is correct
    • Okay to adopt others settings

• Load alignments for F20 and assume the calibrations for serial EM are valid.
  • Stress that it is a bad idea to fiddle with alignments
  • FEG registers Alignments
  • User directories
  • C: Technai Data

• Calibrations must be done in admin mode. To save calibrations you must check next to admin in pull down menu. DO not calibrate unless authorized.

• Binning- adds up selected number of pixels and makes them 1. Reduces info. Shortens exposure.

• Focus area- move to bottom of screen so the camera charge will clear.

• 16 Bits- camera reads 0-65000. Prefer to truncate data, anything over 32500 is thrown away.

• Low Dose- when Tecnai is in exposure mode open serial EM low dose and check box. Focus and tracking should be in the same place. The beam in these areas should not overlap record area. Do not normalize beam through view.

• Set ALLOWTOPICVIEW =

-- KdDerr - 04 Oct 2006

New User Setup Tecnai F20

• Create new accounts on both computers and Greymatter
• Set passwords to never expire
  • Windows 2000 or XP
    • Must be Administrator
    1. Right-click My Computer
    2. Click Manage
    3. Click to Expand Local Users and Groups
    4. Click Users
    5. Double click account
    6. Select Password Never Expires checkbox

• Set up new users as “TEMexperts” to insure functionality

• Remind user to logout and not "shutdown" computers

Tecnai Computer Settings

• Make sure Services is on your desktop Path Programs/Administrative tools/services

• Tecnai User Interface C:/Tecnai/exe/Peoui.exe

• Put control pad light switch on menu bar – tools/customize tool bar/commands/control pads

TECNAI USER INTERFACE TABS

TECNAI USER INTERFACE LOWER SCREEN PANELS

• TUIpanel.bmp: Tecnai User Interface screen shot

Low Dose setup

Teitz Software

• Prompted upon opening:
  • User name (first initial and last name)
  • Working directory – P: /

Fast Scan Camera Computer

• Turn off auto screen off - right click screen: properties/screen saver/power
• Make background black

Fast Scan Camera:

• Select “firewire” when prompted upon opening camera
• Set speed to 300ms
• To enable flat correction - File/preferences/misc - change C:/program files/ to C:/ TVIPS/
• Check flat correction box

Serial EM

• Use C drive
• Personal directory
• Settings are local
  • look feel, camera, tilt series
• Make a shortcut
  • Right click icon to make sure *Start in : Change to user directory * Target is correct
    • Okay to adopt others settings

• Load alignments for F20 and assume the calibrations for serial EM are valid.
  • Stress that it is a bad idea to fiddle with alignments
  • FEG registers Alignments
  • User directories
  • C: Technai Data

• Calibrations must be done in admin mode. To save calibrations you must check next to admin in pull down menu. DO not calibrate unless authorized.

• Binning- adds up selected number of pixels and makes them 1. Reduces info. Shortens exposure.

• Focus area- move to bottom of screen so the camera charge will clear.

• 16 Bits- camera reads 0-65000. Prefer to truncate data, anything over 32500 is thrown away.

• Low Dose- when Tecnai is in exposure mode open serial EM low dose and check box. Focus and tracking should be in the same place. The beam in these areas should not overlap record area. Do not normalize beam through view.

• Set ALLOWTOPICVIEW =

-- KdDerr - 04 Oct 2006

New User Setup Tecnai F20

• Create new accounts on both computers and Greymatter
• Set passwords to never expire
  • Windows 2000 or XP
    • Must be Administrator
    1. Right-click My Computer
    2. Click Manage
    3. Click to Expand Local Users and Groups
    4. Click Users
    5. Double click account
    6. Select Password Never Expires checkbox

• Set up new users as “TEMexperts” to insure functionality

Tecnai Computer Settings

• Make sure Services is on your desktop Path Programs/Administrative tools/services

• Tecnai User Interface C:/Tecnai/exe/Peoui.exe

• Put control pad light switch on menu bar – tools/customize tool bar/commands/control pads

TECNAI USER INTERFACE TABS

TECNAI USER INTERFACE LOWER SCREEN PANELS

• TUIpanel.bmp: Tecnai User Interface screen shot

Low Dose setup

Teitz Software

• Prompted upon opening:
  • User name (first initial and last name)
  • Working directory – P: /

Fast Scan Camera Computer

• Turn off auto screen off - right click screen: properties/screen saver/power
• Make background black

Fast Scan Camera:

• Select “firewire” when prompted upon opening camera
• Set speed to 300ms
• To enable flat correction - File/preferences/misc - change C:/program files/ to C:/ TVIPS/
• Check flat correction box

Serial EM

• Use C drive
• Personal directory
• Settings are local
  • look feel, camera, tilt series
• Make a shortcut
  • Right click icon to make sure *Start in : Change to user directory * Target is correct
    • Okay to adopt others settings

• Load alignments for F20 and assume the calibrations for serial EM are valid.
  • Stress that it is a bad idea to fiddle with alignments
  • FEG registers Alignments
  • User directories
  • C: Technai Data

• Calibrations must be done in admin mode. To save calibrations you must check next to admin in pull down menu. DO not calibrate unless authorized.

• Binning- adds up selected number of pixels and makes them 1. Reduces info. Shortens exposure.

• Focus area- move to bottom of screen so the camera charge will clear.

• 16 Bits- camera reads 0-65000. Prefer to truncate data, anything over 32500 is thrown away.

• Low Dose- when Tecnai is in exposure mode open serial EM low dose and check box. Focus and tracking should be in the same place. The beam in these areas should not overlap record area. Do not normalize beam through view.

• Set ALLOWTOPICVIEW =

-- KdDerr - 04 Oct 2006

New User Setup Tecnai F20

• Create new accounts on both computers and Greymatter
• Set passwords to never expire
  • Windows 2000 or XP
    • Must be Administrator
    1. Right-click My Computer
    2. Click Manage
    3. Click to Expand Local Users and Groups
    4. Click Users
    5. Double click account
    6. Select Password Never Expires checkbox

• Set up new users as “TEMexperts” to insure functionality

Tecnai Computer Settings

• Make sure Services is on your desktop Path Programs/Administrative tools/services

• Tecnai User Interface C:/Tecnai/exe/Peoui.exe

• Put control pad light switch on menu bar – tools/customize tool bar/commands/control pads

TECNAI USER INTERFACE TABS

TECNAI USER INTERFACE LOWER SCREEN PANELS

• TUIpanel.bmp: Tecnai User Interface screen shot

Low Dose setup

Teitz Software

• Prompted upon opening:
  • User name (first initial and last name)
  • Working directory – P: /

Fast Scan Camera Computer

• Turn off auto screen off - right click screen: properties/screen saver/power
• Make background black

Fast Scan Camera:

• Select “firewire” when prompted upon opening camera
• Set speed to 300ms
• To enable flat correction - File/preferences/misc - change C:/program files/ to C:/ TVIPS/
• Check flat correction box

Serial EM

• Use C drive
• Personal directory
• Settings are local
  • look feel, camera, tilt series
• Make a shortcut
  • Right click icon to make sure *Start in : Change to user directory * Target is correct
    • Okay to adopt others settings

• Load alignments for F20 and assume the calibrations for serial EM are valid.
  • Stress that it is a bad idea to fiddle with alignments
  • FEG registers Alignments
  • User directories
  • C: Technai Data

• Calibrations must be done in admin mode. To save calibrations you must check next to admin in pull down menu. DO not calibrate unless authorized.

• Binning- adds up selected number of pixels and makes them 1. Reduces info. Shortens exposure.

• Focus area- move to bottom of screen so the camera charge will clear.

• 16 Bits- camera reads 0-65000. Prefer to truncate data, anything over 32500 is thrown away.

• Low Dose- when Tecnai is in exposure mode open serial EM low dose and check box. Focus and tracking should be in the same place. The beam in these areas should not overlap record area. Do not normalize beam through view.

• Set ALLOWTOPICVIEW =

-- KdDerr - 04 Oct 2006

New User Setup Tecnai F20

• Create new accounts on both computers and Greymatter

• Set up new users as “TEMexperts” to insure functionality

Tecnai Computer Settings

• Make sure Services is on your desktop Path Programs/Administrative tools/services

• Tecnai User Interface C:/Tecnai/exe/Peoui.exe

• Put control pad light switch on menu bar – tools/customize tool bar/commands/control pads

TECNAI USER INTERFACE TABS

TECNAI USER INTERFACE LOWER SCREEN PANELS

• TUIpanel.bmp: Tecnai User Interface screen shot

Low Dose setup

Teitz Software

• Prompted upon opening:
  • User name (first initial and last name)
  • Working directory – P: /

Fast Scan Camera Computer

• Turn off auto screen off - right click screen: properties/screen saver/power
• Make background black

Fast Scan Camera:

• Select “firewire” when prompted upon opening camera
• Set speed to 300ms
• To enable flat correction - File/preferences/misc - change C:/program files/ to C:/ TVIPS/
• Check flat correction box

Serial EM

• Use C drive
• Personal directory
• Settings are local
  • look feel, camera, tilt series
• Make a shortcut
  • Right click icon to make sure *Start in : Change to user directory * Target is correct
    • Okay to adopt others settings

• Load alignments for F20 and assume the calibrations for serial EM are valid.
  • Stress that it is a bad idea to fiddle with alignments
  • FEG registers Alignments
  • User directories
  • C: Technai Data

• Calibrations must be done in admin mode. To save calibrations you must check next to admin in pull down menu. DO not calibrate unless authorized.

• Binning- adds up selected number of pixels and makes them 1. Reduces info. Shortens exposure.

• Focus area- move to bottom of screen so the camera charge will clear.

• 16 Bits- camera reads 0-65000. Prefer to truncate data, anything over 32500 is thrown away.

• Low Dose- when Tecnai is in exposure mode open serial EM low dose and check box. Focus and tracking should be in the same place. The beam in these areas should not overlap record area. Do not normalize beam through view.

• Set ALLOWTOPICVIEW =

-- KdDerr - 04 Oct 2006

New User Setup Tecnai F20

• Create new accounts on both computers and Greymatter
• Set passwords to not expire
• Set up new users as “TEMexperts” to insure functionality

Tecnai Computer Settings

• Make sure Services is on your desktop Path Programs/Administrative tools/services

• Tecnai User Interface C:/Tecnai/exe/Peoui.exe

• Put control pad light switch on menu bar – tools/customize tool bar/commands/control pads

TECNAI USER INTERFACE TABS

TECNAI USER INTERFACE LOWER SCREEN PANELS

Low Dose setup

Teitz Software

Fast Scan Camera Computer

• Turn off auto screen off - right click screen: properties/screen saver/power
• Make background black

Fast Scan Camera:

• Set speed to 300ms

Serial EM

• Use C drive
• Personal directory
• Settings are local
  • look feel, camera, tilt series
• Make a shortcut
  • Right click icon to make sure *Start in : Change to user directory * Target is correct
    • Okay to adopt others settings

• Load alignments for F20 and assume the calibrations for serial EM are valid.
  • Stress that it is a bad idea to fiddle with alignments
  • FEG registers Alignments
  • User directories
  • C: Technai Data

• Calibrations must be done in admin mode. To save calibrations you must check next to admin in pull down menu. DO not calibrate unless authorized.

• Binning- adds up selected number of pixels and makes them 1. Reduces info. Shortens exposure.

• Focus area- move to bottom of screen so the camera charge will clear.

• 16 Bits- camera reads 0-65000. Prefer to truncate data, anything over 32500 is thrown away.

• Low Dose- when Tecnai is in exposure mode open serial EM low dose and check box. Focus and tracking should be in the same place. The beam in these areas should not overlap record area. Do not normalize beam through view.

• Set ALLOWTOPICVIEW =

-- KdDerr - 04 Oct 2006

New User Setup Tecnai F20

• Create new accounts on both computers and Greymatter
• Set passwords to not expire
• Set up new users as “TEMexperts” to insure functionality

Tecnai Computer Settings

• Make sure Services is on your desktop Path Programs/Administrative tools/services

• Tecnai User Interface C:/Tecnai/exe/Peoui.exe

• Put control pad light switch on menu bar – tools/customize tool bar/commands/control pads

TECNAI USER INTERFACE TABS

TECNAI USER INTERFACE LOWER SCREEN PANELS

• TUIpanel.bmp: TUIpanel.bmp

Low Dose setup

Teitz Software

• Working directory – P: /

Fast Scan Camera Computer

• Turn off auto screen off - right click screen: properties/screen saver/power
• Make background black

Fast Scan Camera:

• Select “firewire” when opening camera
• Set speed to 300ms

• Click flat correction

Serial EM

• Use C drive
• Personal directory
• Settings are local
  • look feel, camera, tilt series
• Make a shortcut
  • Right click icon to make sure *Start in : Change to user directory * Target is correct
    • Okay to adopt others settings

• Load alignments for F20 and assume the calibrations for serial EM are valid.
  • Stress that it is a bad idea to fiddle with alignments
  • FEG registers Alignments
  • User directories
  • C: Technai Data

• Calibrations must be done in admin mode. To save calibrations you must check next to admin in pull down menu. DO not calibrate unless authorized.

• Binning- adds up selected number of pixels and makes them 1. Reduces info. Shortens exposure.

• Focus area- move to bottom of screen so the camera charge will clear.

• 16 Bits- camera reads 0-65000. Prefer to truncate data, anything over 32500 is thrown away.

• Low Dose- when Tecnai is in exposure mode open serial EM low dose and check box. Focus and tracking should be in the same place. The beam in these areas should not overlap record area. Do not normalize beam through view.

• Set ALLOWTOPICVIEW =

-- KdDerr - 04 Oct 2006

New User Setup Tecnai F20

• Create new accounts on both computers and Greymatter
• Set passwords to not expire
• Set up new users as “TEMexperts” to insure functionality

Tecnai Computer Settings

• Make sure Services is on your desktop Path Programs/Administrative tools/services

• Tecnai User Interface C:/Tecnai/exe/Peoui.exe

• Put control pad light switch on menu bar – tools/customize tool bar/commands/control pads

TECNAI USER INTERFACE TABS

TECNAI USER INTERFACE LOWER SCREEN PANELS

• TUIpanel.bmp: TUIpanel.bmp

Low Dose setup

Teitz Software

• Working directory – P: /

Fast Scan Camera Computer

• Turn off auto screen off - right click screen: properties/screen saver/power
• Make background black

Fast Scan Camera:

• Select “firewire” when opening camera
• Set speed to 300ms

• Click flat correction

Serial EM

• Use C drive
• Personal directory
• Settings are local
  • look feel, camera, tilt series
• Make a shortcut
  • Right click icon to make sure *Start in : Change to user directory * Target is correct
    • Okay to adopt others settings

• Load alignments for F20 and assume the calibrations for serial EM are valid.
  • Stress that it is a bad idea to fiddle with alignments
  • FEG registers Alignments
  • User directories
  • C: Technai Data

• Calibrations must be done in admin mode. To save calibrations you must check next to admin in pull down menu. DO not calibrate unless authorized.

• Binning- adds up selected number of pixels and makes them 1. Reduces info. Shortens exposure.

• Focus area- move to bottom of screen so the camera charge will clear.

• 16 Bits- camera reads 0-65000. Prefer to truncate data, anything over 32500 is thrown away.

• Low Dose- when Tecnai is in exposure mode open serial EM low dose and check box. Focus and tracking should be in the same place. The beam in these areas should not overlap record area. Do not normalize beam through view.

• Set ALLOWTOPICVIEW =

-- KdDerr - 04 Oct 2006

New User Setup Tecnai F20

• Create new accounts on both computers and Greymatter
• Set passwords to not expire
• Set up new users as “TEMexperts” to insure functionality

Tecnai Computer Settings

• Make sure Services is on your desktop Path Programs/Administrative tools/services

• Tecnai User Interface C:/Tecnai/exe/Peoui.exe

• Put control pad light switch on menu bar – tools/customize tool bar/commands/control pads

TECNAI USER INTERFACE TABS

TECNAI USER INTERFACE LOWER SCREEN PANELS

• TUIpanel.bmp: TUIpanel.bmp

Low Dose setup

Teitz Software

• Working directory – P: /

Fast Scan Camera Computer

• Turn off auto screen off - right click screen: properties/screen saver/power
• Make background black

Fast Scan Camera:

• Select “firewire” when opening camera
• Set speed to 300ms

• Click flat correction

Serial EM

• Use C drive
• Personal directory
• Settings are local
  • look feel, camera, tilt series
• Make a shortcut
  • Right click icon to make sure *Start in : Change to user directory * Target is correct
    • Okay to adopt others settings

• Load alignments for F20 and assume the calibrations for serial EM are valid.
  • Stress that it is a bad idea to fiddle with alignments
  • FEG registers Alignments
  • User directories
  • C: Technai Data

• Calibrations must be done in admin mode. To save calibrations you must check next to admin in pull down menu. DO not calibrate unless authorized.

• Binning- adds up selected number of pixels and makes them 1. Reduces info. Shortens exposure.

• Focus area- move to bottom of screen so the camera charge will clear.

• 16 Bits- camera reads 0-65000. Prefer to truncate data, anything over 32500 is thrown away.

• Low Dose- when Tecnai is in exposure mode open serial EM low dose and check box. Focus and tracking should be in the same place. The beam in these areas should not overlap record area. Do not normalize beam through view.

• Set ALLOWTOPICVIEW =

-- KdDerr - 04 Oct 2006

New User Setup Tecnai F20

• Create new accounts on both computers and Greymatter
• Set passwords to not expire
• Set up new users as “TEMexperts” to insure functionality

Tecnai Computer Settings

• Make sure Services is on your desktop Path Programs/Administrative tools/services

• Tecnai User Interface C:/Tecnai/exe/Peoui.exe

• Put control pad light switch on menu bar – tools/customize tool bar/commands/control pads

TECNAI USER INTERFACE TABS

TECNAI USER INTERFACE LOWER SCREEN PANELS

• TUIpanel.bmp: TUIpanel.bmp

Low Dose setup

Teitz Software

Fast Scan Camera Computer

Fast Scan Camera:

Serial EM

• Set ALLOWTOPICVIEW =

-- KdDerr - 04 Oct 2006

New User Setup Tecnai F20

• Create new accounts on both computers and Greymatter
• Set passwords to not expire
• Set up new users as “TEMexperts” to insure functionality

Tecnai Computer Settings

• Make sure Services is on your desktop Path Programs/Administrative tools/services

• Tecnai User Interface C:/Tecnai/exe/Peoui.exe

• Put control pad light switch on menu bar – tools/customize tool bar/commands/control pads

TECNAI USER INTERFACE TABS

TECNAI USER INTERFACE LOWER SCREEN PANELS

• TUIpanel.bmp: TUIpanel.bmp

Low Dose setup

Teitz Software

Fast Scan Camera Computer

Fast Scan Camera:

Serial EM

System Vs User directories Program personal settings Calibrations need to change start in line under properties to prevent over writing

Load alignments for F20 and assume the calibrations for serial EM are valid. Stress that it is a bad idea to fiddle with alignments FEG registers Alignments User directories

C

Technai Data

Calibrations must be done in admin mode. To save calibrations you must check next to admin in pull down menu. DO not calibrate unless authorized.

Binning- adds up selected number of pixels and makes them 1. Reduces info. Shortens exposure.

Focus area- move to bottom of screen so the camera charge will clear.

16 Bits- camera reads 0-65000. Prefer to truncate data, anything over 32500 is thrown away.

Low Dose- when Tecnai is in exposure mode open serial EM low dose and check box. Focus and tracking should be in the same place. The beam in these areas should not overlap record area. Do not normalize beam through view. Start with a negative tilt and go positive. Nudge goniometer up higher to avoid hysterisis.

• Set ALLOWTOPICVIEW =

-- KdDerr - 04 Oct 2006

New User Setup Tecnai F20

• Create new accounts on both computers and Greymatter
• Set passwords to not expire
• Set up new users as “TEMexperts” to insure functionality

Tecnai Computer Settings

• Make sure Services is on your desktop Path Programs/Administrative tools/services

• Tecnai User Interface C:/Tecnai/exe/Peoui.exe

• Put control pad light switch on menu bar – tools/customize tool bar/commands/control pads

TECNAI USER INTERFACE TABS

TECNAI USER INTERFACE LOWER SCREEN PANELS

Low Dose setup

Teitz Software

Fast Scan Camera Computer

Fast Scan Camera:

Serial EM

System Vs User directories Program personal settings Calibrations need to change start in line under properties to prevent over writing

Load alignments for F20 and assume the calibrations for serial EM are valid. Stress that it is a bad idea to fiddle with alignments FEG registers Alignments User directories

C

Technai Data

Calibrations must be done in admin mode. To save calibrations you must check next to admin in pull down menu. DO not calibrate unless authorized.

Binning- adds up selected number of pixels and makes them 1. Reduces info. Shortens exposure.

Focus area- move to bottom of screen so the camera charge will clear.

16 Bits- camera reads 0-65000. Prefer to truncate data, anything over 32500 is thrown away.

Low Dose- when Tecnai is in exposure mode open serial EM low dose and check box. Focus and tracking should be in the same place. The beam in these areas should not overlap record area. Do not normalize beam through view. Start with a negative tilt and go positive. Nudge goniometer up higher to avoid hysterisis.

• Set ALLOWTOPICVIEW =

-- KdDerr - 04 Oct 2006 * TUIpanel.bmp: TUIpanel.bmp

New User Setup Tecnai F20

• Create new accounts on both computers and Greymatter
• Set passwords to not expire
• Set up new users as “TEMexperts” to insure functionality

Tecnai Computer Settings

• Make sure Services is on your desktop Path Programs/Administrative tools/services

• Tecnai User Interface C:/Tecnai/exe/Peoui.exe

• Put control pad light switch on menu bar – tools/customize tool bar/commands/control pads

TECNAI USER INTERFACE TABS

TECNAI USER INTERFACE LOWER SCREEN PANELS

Low Dose setup

Teitz Software

Fast Scan Camera Computer

Fast Scan Camera:

Serial EM

System Vs User directories Program personal settings Calibrations need to change start in line under properties to prevent over writing

Load alignments for F20 and assume the calibrations for serial EM are valid. Stress that it is a bad idea to fiddle with alignments FEG registers Alignments User directories

C

Technai Data

Calibrations must be done in admin mode. To save calibrations you must check next to admin in pull down menu. DO not calibrate unless authorized.

Binning- adds up selected number of pixels and makes them 1. Reduces info. Shortens exposure.

Focus area- move to bottom of screen so the camera charge will clear.

16 Bits- camera reads 0-65000. Prefer to truncate data, anything over 32500 is thrown away.

Low Dose- when Tecnai is in exposure mode open serial EM low dose and check box. Focus and tracking should be in the same place. The beam in these areas should not overlap record area. Do not normalize beam through view. Start with a negative tilt and go positive. Nudge goniometer up higher to avoid hysterisis.

• Set ALLOWTOPICVIEW =

-- KdDerr - 04 Oct 2006

New User Setup Tecnai F20

• Create new accounts on both computers and Greymatter
• Set passwords to not expire
• Set up new users as “TEMexperts” to insure functionality

Tecnai Computer Settings

• Make sure Services is on your desktop Path Programs/Administrative tools/services

• Tecnai User Interface C:/Tecnai/exe/Peoui.exe

• Put control pad light switch on menu bar – tools/customize tool bar/commands/control pads

TECNAI USER INTERFACE TABS

TECNAI USER INTERFACE LOWER SCREEN PANELS

Low Dose setup

Teitz Software

Fast Scan Camera Computer

Fast Scan Camera:

Serial EM

System Vs User directories Program personal settings Calibrations need to change start in line under properties to prevent over writing

Load alignments for F20 and assume the calibrations for serial EM are valid. Stress that it is a bad idea to fiddle with alignments FEG registers Alignments User directories

C

Technai Data

Calibrations must be done in admin mode. To save calibrations you must check next to admin in pull down menu. DO not calibrate unless authorized.

Binning- adds up selected number of pixels and makes them 1. Reduces info. Shortens exposure.

Focus area- move to bottom of screen so the camera charge will clear.

16 Bits- camera reads 0-65000. Prefer to truncate data, anything over 32500 is thrown away.

Low Dose- when Tecnai is in exposure mode open serial EM low dose and check box. Focus and tracking should be in the same place. The beam in these areas should not overlap record area. Do not normalize beam through view. Start with a negative tilt and go positive. Nudge goniometer up higher to avoid hysterisis.

• Set ALLOWTOPICVIEW =

-- KdDerr - 04 Oct 2006 * TUIpanel.bmp: TUIpanel.bmp

New User Setup Tecnai F20

• Create new accounts on both computers and Greymatter
• Set passwords to not expire
• Set up new users as “TEMexperts” to insure functionality

Tecnai Computer Settings

• Make sure Services is on your desktop Path Programs/Administrative tools/services

• Tecnai User Interface C:/Tecnai/exe/Peoui.exe

• Put control pad light switch on menu bar – tools/customize tool bar/commands/control pads

TECNAI USER INTERFACE TABS

TECNAI USER INTERFACE LOWER SCREEN PANELS

Low Dose setup

Teitz Software

Fast Scan Camera Computer

Fast Scan Camera:

Serial EM

System Vs User directories Program personal settings Calibrations need to change start in line under properties to prevent over writing

Load alignments for F20 and assume the calibrations for serial EM are valid. Stress that it is a bad idea to fiddle with alignments FEG registers Alignments User directories

C

Technai Data

Calibrations must be done in admin mode. To save calibrations you must check next to admin in pull down menu. DO not calibrate unless authorized.

Binning- adds up selected number of pixels and makes them 1. Reduces info. Shortens exposure.

Focus area- move to bottom of screen so the camera charge will clear.

16 Bits- camera reads 0-65000. Prefer to truncate data, anything over 32500 is thrown away.

Low Dose- when Tecnai is in exposure mode open serial EM low dose and check box. Focus and tracking should be in the same place. The beam in these areas should not overlap record area. Do not normalize beam through view. Start with a negative tilt and go positive. Nudge goniometer up higher to avoid hysterisis.

• Set ALLOWTOPICVIEW =

-- KdDerr - 04 Oct 2006

New User Setup Tecnai F20

• Create new accounts on both computers and Greymatter
• Set passwords to not expire
• Set up new users as “TEMexperts” to insure functionality

Tecnai Computer Settings

• Make sure Services is on your desktop Path Programs/Administrative tools/services

• Tecnai User Interface C:/Tecnai/exe/Peoui.exe

• Put control pad light switch on menu bar – tools/customize tool bar/commands/control pads

TECNAI USER INTERFACE TABS

TECNAI USER INTERFACE LOWER SCREEN PANELS

Low Dose setup

Teitz Software

Fast Scan Camera Computer

Fast Scan Camera:

Serial EM

System Vs User directories Program personal settings Calibrations need to change start in line under properties to prevent over writing

Load alignments for F20 and assume the calibrations for serial EM are valid. Stress that it is a bad idea to fiddle with alignments FEG registers Alignments User directories

C

Technai Data

Calibrations must be done in admin mode. To save calibrations you must check next to admin in pull down menu. DO not calibrate unless authorized.

Binning- adds up selected number of pixels and makes them 1. Reduces info. Shortens exposure.

Focus area- move to bottom of screen so the camera charge will clear.

16 Bits- camera reads 0-65000. Prefer to truncate data, anything over 32500 is thrown away.

Low Dose- when Tecnai is in exposure mode open serial EM low dose and check box. Focus and tracking should be in the same place. The beam in these areas should not overlap record area. Do not normalize beam through view. Start with a negative tilt and go positive. Nudge goniometer up higher to avoid hysterisis.

• Set ALLOWTOPICVIEW =

-- KdDerr - 04 Oct 2006

New User Setup Tecnai F20

• Create new accounts on both computers and Greymatter
• Set passwords to not expire
• Set up new users as “TEMexperts” to insure functionality

Tecnai Computer Settings

• Make sure Services is on your desktop Path Programs/Administrative tools/services

• Tecnai User Interface C:/Tecnai/exe/Peoui.exe

• Put control pad light switch on menu bar – tools/customize tool bar/commands/control pads

TECNAI USER INTERFACE TABS

TECNAI USER INTERFACE LOWER SCREEN PANELS

Teitz Software

Fast Scan Camera Computer

Fast Scan Camera:

Serial EM

System Vs User directories Program personal settings Calibrations need to change start in line under properties to prevent over writing

Load alignments for F20 and assume the calibrations for serial EM are valid. Stress that it is a bad idea to fiddle with alignments FEG registers Alignments User directories

C

Technai Data

Calibrations must be done in admin mode. To save calibrations you must check next to admin in pull down menu. DO not calibrate unless authorized.

Binning- adds up selected number of pixels and makes them 1. Reduces info. Shortens exposure.

Focus area- move to bottom of screen so the camera charge will clear.

16 Bits- camera reads 0-65000. Prefer to truncate data, anything over 32500 is thrown away.

Low Dose- when Tecnai is in exposure mode open serial EM low dose and check box. Focus and tracking should be in the same place. The beam in these areas should not overlap record area. Do not normalize beam through view. Start with a negative tilt and go positive. Nudge goniometer up higher to avoid hysterisis.

• Set ALLOWTOPICVIEW =

-- KdDerr - 04 Oct 2006

New User Setup Tecnai F20

• Create new accounts on both computers and Greymatter
• Set passwords to not expire
• Set up new users as “TEMexperts” to insure functionality

Tecnai Computer Settings

• Make sure Services is on your desktop Path Programs/Administrative tools/services

• Tecnai User Interface C:/Tecnai/exe/Peoui.exe

• Put control pad light switch on menu bar – tools/customize tool bar/commands/control pads

TECNAI USER INTERFACE TABS

TECNAI USER INTERFACE LOWER SCREEN PANELS

Teitz Software

Fast Scan Camera Computer

Fast Scan Camera:

Serial EM

System Vs User directories Program personal settings Calibrations need to change start in line under properties to prevent over writing

Load alignments for F20 and assume the calibrations for serial EM are valid. Stress that it is a bad idea to fiddle with alignments FEG registers Alignments User directories

C

Technai Data

Calibrations must be done in admin mode. To save calibrations you must check next to admin in pull down menu. DO not calibrate unless authorized.

Binning- adds up selected number of pixels and makes them 1. Reduces info. Shortens exposure.

Focus area- move to bottom of screen so the camera charge will clear.

16 Bits- camera reads 0-65000. Prefer to truncate data, anything over 32500 is thrown away.

Low Dose- when Tecnai is in exposure mode open serial EM low dose and check box. Focus and tracking should be in the same place. The beam in these areas should not overlap record area. Do not normalize beam through view. Start with a negative tilt and go positive. Nudge goniometer up higher to avoid hysterisis.

• Set ALLOWTOPICVIEW =

-- KdDerr - 04 Oct 2006

New User Setup Tecnai F20

• Create new accounts on both computers and Greymatter
• Set passwords to not expire
• Set up new users as “TEMexperts” to insure functionality

Tecnai Computer Settings

• Make sure Services is on your desktop Path Programs/Administrative tools/services

• Tecnai User Interface C:/Tecnai/exe/Peoui.exe

• Put control pad light switch on menu bar – tools/customize tool bar/commands/control pads

TECNAI USER INTERFACE LOWER SCREEN PANELS

Teitz Software

Fast Scan Camera Computer

Fast Scan Camera:

Serial EM

System Vs User directories Program personal settings Calibrations need to change start in line under properties to prevent over writing

Load alignments for F20 and assume the calibrations for serial EM are valid. Stress that it is a bad idea to fiddle with alignments FEG registers Alignments User directories

C

Technai Data

Calibrations must be done in admin mode. To save calibrations you must check next to admin in pull down menu. DO not calibrate unless authorized.

Binning- adds up selected number of pixels and makes them 1. Reduces info. Shortens exposure.

Focus area- move to bottom of screen so the camera charge will clear.

16 Bits- camera reads 0-65000. Prefer to truncate data, anything over 32500 is thrown away.

Low Dose- when Tecnai is in exposure mode open serial EM low dose and check box. Focus and tracking should be in the same place. The beam in these areas should not overlap record area. Do not normalize beam through view. Start with a negative tilt and go positive. Nudge goniometer up higher to avoid hysterisis.

• Set ALLOWTOPICVIEW =

-- KdDerr - 04 Oct 2006

New User Setup Tecnai F20

• Create new accounts on both computers and Greymatter
• Set passwords to not expire
• Set up new users as “TEMexperts” to insure functionality

Tecnai Computer Settings

• Make sure Services is on your desktop Path Programs/Administrative tools/services

• Tecnai User Interface C:/Tecnai/exe/Peoui.exe

• Put control pad light switch on menu bar – tools/customize tool bar/commands/control pads

TECNAI USER INTERFACE LOWER SCREEN PANELS

Teitz Software

Fast Scan Camera Computer

Fast Scan Camera:

Serial EM

System Vs User directories Program personal settings Calibrations need to change start in line under properties to prevent over writing

Load alignments for F20 and assume the calibrations for serial EM are valid. Stress that it is a bad idea to fiddle with alignments FEG registers Alignments User directories

C

Technai Data

Calibrations must be done in admin mode. To save calibrations you must check next to admin in pull down menu. DO not calibrate unless authorized.

Binning- adds up selected number of pixels and makes them 1. Reduces info. Shortens exposure.

Focus area- move to bottom of screen so the camera charge will clear.

16 Bits- camera reads 0-65000. Prefer to truncate data, anything over 32500 is thrown away.

Low Dose- when Tecnai is in exposure mode open serial EM low dose and check box. Focus and tracking should be in the same place. The beam in these areas should not overlap record area. Do not normalize beam through view. Start with a negative tilt and go positive. Nudge goniometer up higher to avoid hysterisis.

• Set ALLOWTOPICVIEW =

-- KdDerr - 04 Oct 2006

New User Setup Tecnai F20

• Create new accounts on both computers and Greymatter
• Set passwords to not expire
• Set up new users as “TEMexperts” to insure functionality

Tecnai Computer Settings

• Make sure Services is on your desktop Path Programs/Administrative tools/services

• Tecnai User Interface C:/Tecnai/exe/Peoui.exe

• Put control pad light switch on menu bar – tools/customize tool bar/commands/control pads

TECNAI USER INTERFACE TABS

Tune Menu Low Dose Search Menu Alignments Low dose Setup Direct alignments Vacuum Stigmators (check “hide active control…”) Beam Settings

TECNAI USER INTERFACE LOWER SCREEN PANELS

Teitz Software

Fast Scan Camera Computer

Fast Scan Camera:

Serial EM

System Vs User directories Program personal settings Calibrations need to change start in line under properties to prevent over writing

Load alignments for F20 and assume the calibrations for serial EM are valid. Stress that it is a bad idea to fiddle with alignments FEG registers Alignments User directories

C

Technai Data

Calibrations must be done in admin mode. To save calibrations you must check next to admin in pull down menu. DO not calibrate unless authorized.

Binning- adds up selected number of pixels and makes them 1. Reduces info. Shortens exposure.

Focus area- move to bottom of screen so the camera charge will clear.

16 Bits- camera reads 0-65000. Prefer to truncate data, anything over 32500 is thrown away.

Low Dose- when Tecnai is in exposure mode open serial EM low dose and check box. Focus and tracking should be in the same place. The beam in these areas should not overlap record area. Do not normalize beam through view. Start with a negative tilt and go positive. Nudge goniometer up higher to avoid hysterisis.

• Set ALLOWTOPICVIEW =

-- KdDerr - 04 Oct 2006