Difference: ShimVal (1 vs. 3)

Revision 317 Sep 2008 - Main.DavidCowburn

 
META TOPICPARENT name="NmrStaffnotes"
Contents

Shimval(11) error message/ console reboots /shim mode: install Because this system has 34 active shims we Trash.findDFdf that keeping the shim mode install mode creates the fewest problems. The following steps should be taken after a reboot of the bsms or if an error message containg "shimval(11)' occurs during gradshim.

  1. From a shell window type "bsms" to enter the BSMS tools.
  2. Select #4 -shim functions.
  3. Select #9 -load functions.
  4. Select C - BOSS select mode
  5. Change mode from 0 (normal) to 2 (install)
  6. exit BSMS tools
  7. From Topspin "wsh GSHIM"

  • Set ALLOWTOPICVIEW =

-- MichaelGoger - 13 Dec 2005

Revision 216 Jul 2008 - Main.DavidCowburn

 
META TOPICPARENT name="NmrStaffnotes"
Contents

Shimval(11) error message/ console reboots /shim mode: install

Changed:
<
<		Because this system has 34 active shims we find that keeping the shim mode install mode creates the fewest problems.
>
>		Because this system has 34 active shims we Trash.findDFdf that keeping the shim mode install mode creates the fewest problems.
 The following steps should be taken after a reboot of the bsms or if an error message containg "shimval(11)' occurs during gradshim.
Changed:
<
<
  1. From a shell window type "bsms" to enter the BSMS tools.
  2. Select #4 -shim functions.
  3. Select #9 -load functions.
  4. Select C - BOSS select mode
  5. Change mode from 0 (normal) to 2 (install)
  6. exit BSMS tools
  7. From Topspin "wsh GSHIM"
>
>
  1. From a shell window type "bsms" to enter the BSMS tools.
  2. Select #4 -shim functions.
  3. Select #9 -load functions.
  4. Select C - BOSS select mode
  5. Change mode from 0 (normal) to 2 (install)
  6. exit BSMS tools
  7. From Topspin "wsh GSHIM"
 
Changed:
<
<
  • Set ALLOWTOPICVIEW =
>
>
  • Set ALLOWTOPICVIEW =
 -- MichaelGoger - 13 Dec 2005

Revision 113 Dec 2005 - Main.MichaelGoger

 
META TOPICPARENT name="NmrStaffnotes"
Contents

Shimval(11) error message/ console reboots /shim mode: install Because this system has 34 active shims we find that keeping the shim mode install mode creates the fewest problems. The following steps should be taken after a reboot of the bsms or if an error message containg "shimval(11)' occurs during gradshim.

  1. From a shell window type "bsms" to enter the BSMS tools.
  2. Select #4 -shim functions.
  3. Select #9 -load functions.
  4. Select C - BOSS select mode
  5. Change mode from 0 (normal) to 2 (install)
  6. exit BSMS tools
  7. From Topspin "wsh GSHIM"

  • Set ALLOWTOPICVIEW =

-- MichaelGoger - 13 Dec 2005

View topic  |  History: r3 < r2 < r1  |  More topic actions...
 
Copyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding this intranet, Send feedback