Difference: ClareGrey (1 vs. 8)
Revision 814 Apr 2009 - Main.DavidCowburn
| ||||||||
| Changed: | ||||||||
| < < | Investigator(s) Clare Grey cgrey@sbchem.sunysb.edu(Principal Investigator) | |||||||
| > > | Investigator(s) Clare Grey cgrey@sbchem.sunysb.edu (Principal Investigator) | |||||||
| Sponsor SUNY at Stony Brook
Stony Brook, NY 11794 631/632-9949
NSF Program(s) SOLID-STATE CHEMISTRY
Field Application(s) 0106000 Materials Research
Program Reference Code(s) AMPP,9161
Program Element Code(s) 1762
Abstract
TECHNICAL EXPLANATION New solid-state electrolytes with higher ionic conductivities are required in order to lower the operating temperatures of a solid oxide fuel cell (SOFC). In this research project, two phenomena that limit ionic conductivity at low temperatures or that may help in the design of materials with very high conductivities at moderate temperatures will be investigated. Specifically, solid-state NMR spectroscopy will be used to (i) investigate structure and ionic mobility at the interfaces between two phases (e.g., heterolayers formed of CaF2 and BaF2) or at the surfaces of nanoparticles, and (ii) identify the cation sites that are nearby the oxygen-ion vacancies in the moderate oxygen-ion conductor, doped lanthanum gallate (La0.9Sr0.1Ga0.9Mg0.1O3), in order to explore effects arising from trapped vacancy-dopant clusters formed due to magnesium (Mg2+) and strontium (Sr2+) doping. Fluorine-19 (19F) and oxygen-17 (17) NMR will be used to investigate local structure and mobility; the local environments surrounding the cations will be probed by using gallium-71 (71Ga) and magnesium-25 (25Mg) magic angle spinning (MAS) nuclear magnetic resonance (NMR) spectroscopy. Finally, MAS NMR methods will be used to study a series of battery electrode materials and related compounds. Many of these materials show metallic behavior and one aim of the work is to develop straightforward approaches for extracting structural/electronic information from the NMR spectra of these compounds. The research program will be incorporated into outreach activities involving both high and middle school students, undergraduates and the community at large. The P.I. runs a high-school program for minority students, which focuses on power sources, where the students synthesize battery electrodes (e.g., lithium manganese) and test their own batteries. NON-TECHNICAL EXPLANATION Improved batteries and fuel cells with higher power densities are critically needed to help facilitate the move from an oil-based economy, to an economy based on a more diverse range of energy sources. New materials are required which will allow rapid transport of oxygen ions through a solid in order to lower the operating temperatures of a solid oxide fuel cell (SOFC), and reduce the costs of these devices. The aim of the first part of this research program is to identify, via the use of solid-state NMR methods, phenomena that limit conductivity of oxygen ions in membranes and at the interfaces between two different materials. Solid-state NMR methods allow the ions that move in a solid to be observed directly, and their mobility to be measured. The results from this program will help in the design of improved fuel cells and other devices where oxygen conduction is important (e.g., oxygen/nitrogen separations and oxygen sensors). In the second part of the research program, NMR methods will be used to study a series of battery electrode materials and related compounds in order to understand how these materials function. The research program will be incorporated into outreach activities involving both high school and middle school students, undergraduates and the community at large. The P.I. runs a high-school program for minority students, which focuses on power sources, where the students make and test their own batteries.
Personal Preferences (details in TWikiVariables)
| ||||||||
Revision 701 Apr 2008 - Main.DavidCowburn
| ||||||||
| Changed: | ||||||||
| < < | TECHNICAL EXPLANATION New solid-state electrolytes with higher ionic conductivities are required in order to lower the operating temperatures of a solid oxide fuel cell (SOFC). In this research projectyiyiu, two phenomena that limit ionic conductivity at low temperatures or that may help in the design of materials with very high conductivities at moderate temperatures will be investigated. Specifically, solid-state NMR spectroscopy will be used to (i) investigate structure and ionic mobility at the interfaces between two phases (e.g., heterolayers formed of CaF2 and BaF2) or at the surfaces of nanoparticles, and (ii) identify the cation sites that are nearby the oxygen-ion vacancies in the moderate oxygen-ion conductor, doped lanthanum gallate (La0.9Sr0.1Ga0.9Mg0.1O3), in order to explore effects arising from trapped vacancy-dopant clusters formed due to magnesium (Mg2+) and strontium (Sr2+) doping. Fluorine-19 (19F) and oxygen-17 (17) NMR will be used to investigate local structure and mobility; the local environments surrounding the cations will be probed by using gallium-71 (71Ga) and magnesium-25 (25Mg) magic angle spinning (MAS) nuclear magnetic resonance (NMR) spectroscopy. Finally, MAS NMR methods will be used to study a series of battery electrode materials and related compounds. Many of these materials show metallic behavior and one aim of the work is to develop straightforward approaches for extracting structural/electronic information from the NMR spectra of these compounds. The research program will be incorporated into outreach activities involving both high and middle school students, undergraduates and the community at large. The P.I. runs a high-school program for minority students, which focuses on power sources, where the students synthesize battery electrodes (e.g., lithium manganese) and test their own batteries. NON-TECHNICAL EXPLANATION Improved batteries and fuel cells with higher power densities are critically needed to help facilitate the move from an oil-based economy, to an economy based on a more diverse range of energy sources. New materials are required which will allow rapid transport of oxygen ions through a solid in order to lower the operating temperatures of a solid oxide fuel cell (SOFC), and reduce the costs of these devices. The aim of the first part of this research program is to identify, via the use of solid-state NMR methods, phenomena that limit conductivity of oxygen ions in membranes and at the interfaces between two different materials. Solid-state NMR methods allow the ions that move in a solid to be observed directly, and their mobility to be measured. The results from this program will help in the design of improved fuel cells and other devices where oxygen conduction is important (e.g., oxygen/nitrogen separations and oxygen sensors). In the second part of the research program, NMR methods will be used to study a series of battery electrode materials and related compounds in order to understand how these materials function. The research program will be incorporated into outreach activities involving both high school and middle school students, undergraduates and the community at large. The P.I. runs a high-school program for minority students, which focuses on power sources, where the students make and test their own batteries. | |||||||
| > > | TECHNICAL EXPLANATION New solid-state electrolytes with higher ionic conductivities are required in order to lower the operating temperatures of a solid oxide fuel cell (SOFC). In this research project, two phenomena that limit ionic conductivity at low temperatures or that may help in the design of materials with very high conductivities at moderate temperatures will be investigated. Specifically, solid-state NMR spectroscopy will be used to (i) investigate structure and ionic mobility at the interfaces between two phases (e.g., heterolayers formed of CaF2 and BaF2) or at the surfaces of nanoparticles, and (ii) identify the cation sites that are nearby the oxygen-ion vacancies in the moderate oxygen-ion conductor, doped lanthanum gallate (La0.9Sr0.1Ga0.9Mg0.1O3), in order to explore effects arising from trapped vacancy-dopant clusters formed due to magnesium (Mg2+) and strontium (Sr2+) doping. Fluorine-19 (19F) and oxygen-17 (17) NMR will be used to investigate local structure and mobility; the local environments surrounding the cations will be probed by using gallium-71 (71Ga) and magnesium-25 (25Mg) magic angle spinning (MAS) nuclear magnetic resonance (NMR) spectroscopy. Finally, MAS NMR methods will be used to study a series of battery electrode materials and related compounds. Many of these materials show metallic behavior and one aim of the work is to develop straightforward approaches for extracting structural/electronic information from the NMR spectra of these compounds. The research program will be incorporated into outreach activities involving both high and middle school students, undergraduates and the community at large. The P.I. runs a high-school program for minority students, which focuses on power sources, where the students synthesize battery electrodes (e.g., lithium manganese) and test their own batteries. NON-TECHNICAL EXPLANATION Improved batteries and fuel cells with higher power densities are critically needed to help facilitate the move from an oil-based economy, to an economy based on a more diverse range of energy sources. New materials are required which will allow rapid transport of oxygen ions through a solid in order to lower the operating temperatures of a solid oxide fuel cell (SOFC), and reduce the costs of these devices. The aim of the first part of this research program is to identify, via the use of solid-state NMR methods, phenomena that limit conductivity of oxygen ions in membranes and at the interfaces between two different materials. Solid-state NMR methods allow the ions that move in a solid to be observed directly, and their mobility to be measured. The results from this program will help in the design of improved fuel cells and other devices where oxygen conduction is important (e.g., oxygen/nitrogen separations and oxygen sensors). In the second part of the research program, NMR methods will be used to study a series of battery electrode materials and related compounds in order to understand how these materials function. The research program will be incorporated into outreach activities involving both high school and middle school students, undergraduates and the community at large. The P.I. runs a high-school program for minority students, which focuses on power sources, where the students make and test their own batteries. | |||||||
Personal Preferences (details in TWikiVariables)
| ||||||||
Revision 621 Mar 2008 - Main.DavidCowburn
| ||||||||
| Changed: | ||||||||
| < < | TECHNICAL EXPLANATION New solid-state electrolytes with higher ionic conductivities are required in order to lower the operating temperatures of a solid oxide fuel cell (SOFC). In this research project, two phenomena that limit ionic conductivity at low temperatures or that may help in the design of materials with very high conductivities at moderate temperatures will be investigated. Specifically, solid-state NMR spectroscopy will be used to (i) investigate structure and ionic mobility at the interfaces between two phases (e.g., heterolayers formed of CaF2 and BaF2) or at the surfaces of nanoparticles, and (ii) identify the cation sites that are nearby the oxygen-ion vacancies in the moderate oxygen-ion conductor, doped lanthanum gallate (La0.9Sr0.1Ga0.9Mg0.1O3), in order to explore effects arising from trapped vacancy-dopant clusters formed due to magnesium (Mg2+) and strontium (Sr2+) doping. Fluorine-19 (19F) and oxygen-17 (17) NMR will be used to investigate local structure and mobility; the local environments surrounding the cations will be probed by using gallium-71 (71Ga) and magnesium-25 (25Mg) magic angle spinning (MAS) nuclear magnetic resonance (NMR) spectroscopy. Finally, MAS NMR methods will be used to study a series of battery electrode materials and related compounds. Many of these materials show metallic behavior and one aim of the work is to develop straightforward approaches for extracting structural/electronic information from the NMR spectra of these compounds. The research program will be incorporated into outreach activities involving both high and middle school students, undergraduates and the community at large. The P.I. runs a high-school program for minority students, which focuses on power sources, where the students synthesize battery electrodes (e.g., lithium manganese) and test their own batteries. NON-TECHNICAL EXPLANATION Improved batteries and fuel cells with higher power densities are critically needed to help facilitate the move from an oil-based economy, to an economy based on a more diverse range of energy sources. New materials are required which will allow rapid transport of oxygen ions through a solid in order to lower the operating temperatures of a solid oxide fuel cell (SOFC), and reduce the costs of these devices. The aim of the first part of this research program is to identify, via the use of solid-state NMR methods, phenomena that limit conductivity of oxygen ions in membranes and at the interfaces between two different materials. Solid-state NMR methods allow the ions that move in a solid to be observed directly, and their mobility to be measured. The results from this program will help in the design of improved fuel cells and other devices where oxygen conduction is important (e.g., oxygen/nitrogen separations and oxygen sensors). In the second part of the research program, NMR methods will be used to study a series of battery electrode materials and related compounds in order to understand how these materials function. The research program will be incorporated into outreach activities involving both high school and middle school students, undergraduates and the community at large. The P.I. runs a high-school program for minority students, which focuses on power sources, where the students make and test their own batteries. | |||||||
| > > | TECHNICAL EXPLANATION New solid-state electrolytes with higher ionic conductivities are required in order to lower the operating temperatures of a solid oxide fuel cell (SOFC). In this research projectyiyiu, two phenomena that limit ionic conductivity at low temperatures or that may help in the design of materials with very high conductivities at moderate temperatures will be investigated. Specifically, solid-state NMR spectroscopy will be used to (i) investigate structure and ionic mobility at the interfaces between two phases (e.g., heterolayers formed of CaF2 and BaF2) or at the surfaces of nanoparticles, and (ii) identify the cation sites that are nearby the oxygen-ion vacancies in the moderate oxygen-ion conductor, doped lanthanum gallate (La0.9Sr0.1Ga0.9Mg0.1O3), in order to explore effects arising from trapped vacancy-dopant clusters formed due to magnesium (Mg2+) and strontium (Sr2+) doping. Fluorine-19 (19F) and oxygen-17 (17) NMR will be used to investigate local structure and mobility; the local environments surrounding the cations will be probed by using gallium-71 (71Ga) and magnesium-25 (25Mg) magic angle spinning (MAS) nuclear magnetic resonance (NMR) spectroscopy. Finally, MAS NMR methods will be used to study a series of battery electrode materials and related compounds. Many of these materials show metallic behavior and one aim of the work is to develop straightforward approaches for extracting structural/electronic information from the NMR spectra of these compounds. The research program will be incorporated into outreach activities involving both high and middle school students, undergraduates and the community at large. The P.I. runs a high-school program for minority students, which focuses on power sources, where the students synthesize battery electrodes (e.g., lithium manganese) and test their own batteries. NON-TECHNICAL EXPLANATION Improved batteries and fuel cells with higher power densities are critically needed to help facilitate the move from an oil-based economy, to an economy based on a more diverse range of energy sources. New materials are required which will allow rapid transport of oxygen ions through a solid in order to lower the operating temperatures of a solid oxide fuel cell (SOFC), and reduce the costs of these devices. The aim of the first part of this research program is to identify, via the use of solid-state NMR methods, phenomena that limit conductivity of oxygen ions in membranes and at the interfaces between two different materials. Solid-state NMR methods allow the ions that move in a solid to be observed directly, and their mobility to be measured. The results from this program will help in the design of improved fuel cells and other devices where oxygen conduction is important (e.g., oxygen/nitrogen separations and oxygen sensors). In the second part of the research program, NMR methods will be used to study a series of battery electrode materials and related compounds in order to understand how these materials function. The research program will be incorporated into outreach activities involving both high school and middle school students, undergraduates and the community at large. The P.I. runs a high-school program for minority students, which focuses on power sources, where the students make and test their own batteries. | |||||||
Personal Preferences (details in TWikiVariables)
| ||||||||
Revision 510 May 2007 - Main.DavidCowburn
| ||||||||
| Changed: | ||||||||
| < < |
Personal Preferences (details in TWikiVariables)
| |||||||
| > > |
Personal Preferences (details in TWikiVariables)
| |||||||
Revision 423 Aug 2005 - Main.DavidCowburn
| ||||||||
| Changed: | ||||||||
| < < | TECHNICAL EXPLANATION New solid-state electrolytes with higher ionic conductivities are required in order to lower the operating temperatures of a solid oxide fuel cell (SOFC). In this research project, two phenomena that limit ionic conductivity at low temperatures or that may help in the design of materials with very high conductivities at moderate temperatures will be investigated. Specifically, solid-state NMR spectroscopy will be used to (i) investigate structure and ionic mobility at the interfaces between two phases (e.g., heterolayers formed of CaF2 and BaF2) or at the surfaces of nanoparticles, and (ii) identify the cation sites that are nearby the oxygen-ion vacancies in the moderate oxygen-ion conductor, doped lanthanum gallate (La0.9Sr0.1Ga0.9Mg0.1O3), in order to explore effects arising from trapped vacancy-dopant clusters formed due to magnesium (Mg2+) and strontium (Sr2+) doping. Fluorine-19 (19F) and oxygen-17 (17) NMR will be used to investigate local structure and mobility; the local environments surrounding the cations will be probed by using gallium-71 (71Ga) and magnesium-25 (25Mg) magic angle spinning (MAS) nuclear magnetic resonance (NMR) spectroscopy. Finally, MAS NMR methods will be used to study a series of battery electrode materials and related compounds. Many of these materials show metallic behavior and one aim of the work is to develop straightforward approaches for extracting structural/electronic information from the NMR spectra of these compounds. The research program will be incorporated into outreach activities involving both high and middle school students, undergraduates and the community at large. The P.I. runs a high-school program for minority students, which focuses on power sources, where the students synthesize battery electrodes (e.g., lithium manganese) and test their own batteries. NON-TECHNICAL EXPLANATION Improved batteries and fuel cells with higher power densities are critically needed to help facilitate the move from an oil-based economy, to an economy based on a more diverse range of energy sources. New materials are required which will allow rapid transport of oxygen ions through a solid in order to lower the operating temperatures of a solid oxide fuel cell (SOFC), and reduce the costs of these devices. The aim of the first part of this research program is to identify, via the use of solid-state NMR methods, phenomena that limit conductivity of oxygen ions in membranes and at the interfaces between two different materials. Solid-state NMR methods allow the ions that move in a solid to be observed directly, and their mobility to be measured. The results from this program will help in the design of improved fuel cells and other devices where oxygen conduction is important (e.g., oxygen/nitrogen separations and oxygen sensors). In the second part of the research program, NMR methods will be used to study a series of battery electrode materials and related compounds in order to understand how these materials function. The research program will be incorporated into outreach activities involving both high school and middle school students, undergraduates and the community at large. The P.I. runs a high-school program for minority students, which focuses on power sources, where the students make and test their own batteries. | |||||||
| > > | TECHNICAL EXPLANATION New solid-state electrolytes with higher ionic conductivities are required in order to lower the operating temperatures of a solid oxide fuel cell (SOFC). In this research project, two phenomena that limit ionic conductivity at low temperatures or that may help in the design of materials with very high conductivities at moderate temperatures will be investigated. Specifically, solid-state NMR spectroscopy will be used to (i) investigate structure and ionic mobility at the interfaces between two phases (e.g., heterolayers formed of CaF2 and BaF2) or at the surfaces of nanoparticles, and (ii) identify the cation sites that are nearby the oxygen-ion vacancies in the moderate oxygen-ion conductor, doped lanthanum gallate (La0.9Sr0.1Ga0.9Mg0.1O3), in order to explore effects arising from trapped vacancy-dopant clusters formed due to magnesium (Mg2+) and strontium (Sr2+) doping. Fluorine-19 (19F) and oxygen-17 (17) NMR will be used to investigate local structure and mobility; the local environments surrounding the cations will be probed by using gallium-71 (71Ga) and magnesium-25 (25Mg) magic angle spinning (MAS) nuclear magnetic resonance (NMR) spectroscopy. Finally, MAS NMR methods will be used to study a series of battery electrode materials and related compounds. Many of these materials show metallic behavior and one aim of the work is to develop straightforward approaches for extracting structural/electronic information from the NMR spectra of these compounds. The research program will be incorporated into outreach activities involving both high and middle school students, undergraduates and the community at large. The P.I. runs a high-school program for minority students, which focuses on power sources, where the students synthesize battery electrodes (e.g., lithium manganese) and test their own batteries. NON-TECHNICAL EXPLANATION Improved batteries and fuel cells with higher power densities are critically needed to help facilitate the move from an oil-based economy, to an economy based on a more diverse range of energy sources. New materials are required which will allow rapid transport of oxygen ions through a solid in order to lower the operating temperatures of a solid oxide fuel cell (SOFC), and reduce the costs of these devices. The aim of the first part of this research program is to identify, via the use of solid-state NMR methods, phenomena that limit conductivity of oxygen ions in membranes and at the interfaces between two different materials. Solid-state NMR methods allow the ions that move in a solid to be observed directly, and their mobility to be measured. The results from this program will help in the design of improved fuel cells and other devices where oxygen conduction is important (e.g., oxygen/nitrogen separations and oxygen sensors). In the second part of the research program, NMR methods will be used to study a series of battery electrode materials and related compounds in order to understand how these materials function. The research program will be incorporated into outreach activities involving both high school and middle school students, undergraduates and the community at large. The P.I. runs a high-school program for minority students, which focuses on power sources, where the students make and test their own batteries. | |||||||
Personal Preferences (details in TWikiVariables)
| ||||||||
Revision 320 Jun 2005 - Main.DavidCowburn
| ||||||||
| Changed: | ||||||||
| < < | Public information on Grants associated with NYSBC | |||||||
| > > | Public information on Grants associated with NYSBC | |||||||
| Changed: | ||||||||
| < < | Award Number 0506120 Award Instrument Continuing grant Program Manager David L. Nelson | |||||||
| > > | Award Number 0506120 Award Instrument Continuing grant Program Manager David L. Nelson | |||||||
| DMR Division of Materials Research MPS Directorate for Mathematical & Physical Sciences | ||||||||
| Changed: | ||||||||
| < < | Start Date July 1, 2005 Expires June 30, 2006 (Estimated) Awarded Amount to Date $137000 Investigator(s) Clare Grey cgrey@sbchem.sunysb.edu(Principal Investigator) Sponsor SUNY at Stony Brook | |||||||
| > > | Start Date July 1, 2005 Expires June 30, 2006 (Estimated) Awarded Amount to Date $137000 Investigator(s) Clare Grey cgrey@sbchem.sunysb.edu(Principal Investigator) Sponsor SUNY at Stony Brook | |||||||
| Stony Brook, NY 11794 631/632-9949 | ||||||||
| Changed: | ||||||||
| < < | NSF Program(s) SOLID-STATE CHEMISTRY Field Application(s) 0106000 Materials Research Program Reference Code(s) AMPP,9161 Program Element Code(s) 1762 | |||||||
| > > | NSF Program(s) SOLID-STATE CHEMISTRY Field Application(s) 0106000 Materials Research Program Reference Code(s) AMPP,9161 Program Element Code(s) 1762 | |||||||
| Abstract | ||||||||
| Changed: | ||||||||
| < < | TECHNICAL EXPLANATION New solid-state electrolytes with higher ionic conductivities are required in order to lower the operating temperatures of a solid oxide fuel cell (SOFC). In this research project, two phenomena that limit ionic conductivity at low temperatures or that may help in the design of materials with very high conductivities at moderate temperatures will be investigated. Specifically, solid-state NMR spectroscopy will be used to (i) investigate structure and ionic mobility at the interfaces between two phases (e.g., heterolayers formed of CaF2? and BaF2?) or at the surfaces of nanoparticles, and (ii) identify the cation sites that are nearby the oxygen-ion vacancies in the moderate oxygen-ion conductor, doped lanthanum gallate (La0.9Sr0.1Ga0.9Mg0.1O3), in order to explore effects arising from trapped vacancy-dopant clusters formed due to magnesium (Mg2+) and strontium (Sr2+) doping. Fluorine-19 (19F) and oxygen-17 (17O) NMR will be used to investigate local structure and mobility; the local environments surrounding the cations will be probed by using gallium-71 (71Ga) and magnesium-25 (25Mg) magic angle spinning (MAS) nuclear magnetic resonance (NMR) spectroscopy. Finally, MAS NMR methods will be used to study a series of battery electrode materials and related compounds. Many of these materials show metallic behavior and one aim of the work is to develop straightforward approaches for extracting structural/electronic information from the NMR spectra of these compounds. The research program will be incorporated into outreach activities involving both high and middle school students, undergraduates and the community at large. The P.I. runs a high-school program for minority students, which focuses on power sources, where the students synthesize battery electrodes (e.g., lithium manganese) and test their own batteries. NON-TECHNICAL EXPLANATION Improved batteries and fuel cells with higher power densities are critically needed to help facilitate the move from an oil-based economy, to an economy based on a more diverse range of energy sources. New materials are required which will allow rapid transport of oxygen ions through a solid in order to lower the operating temperatures of a solid oxide fuel cell (SOFC), and reduce the costs of these devices. The aim of the first part of this research program is to identify, via the use of solid-state NMR methods, phenomena that limit conductivity of oxygen ions in membranes and at the interfaces between two different materials. Solid-state NMR methods allow the ions that move in a solid to be observed directly, and their mobility to be measured. The results from this program will help in the design of improved fuel cells and other devices where oxygen conduction is important (e.g., oxygen/nitrogen separations and oxygen sensors). In the second part of the research program, NMR methods will be used to study a series of battery electrode materials and related compounds in order to understand how these materials function. The research program will be incorporated into outreach activities involving both high school and middle school students, undergraduates and the community at large. The P.I. runs a high-school program for minority students, which focuses on power sources, where the students make and test their own batteries. | |||||||
| > > | TECHNICAL EXPLANATION New solid-state electrolytes with higher ionic conductivities are required in order to lower the operating temperatures of a solid oxide fuel cell (SOFC). In this research project, two phenomena that limit ionic conductivity at low temperatures or that may help in the design of materials with very high conductivities at moderate temperatures will be investigated. Specifically, solid-state NMR spectroscopy will be used to (i) investigate structure and ionic mobility at the interfaces between two phases (e.g., heterolayers formed of CaF2 and BaF2) or at the surfaces of nanoparticles, and (ii) identify the cation sites that are nearby the oxygen-ion vacancies in the moderate oxygen-ion conductor, doped lanthanum gallate (La0.9Sr0.1Ga0.9Mg0.1O3), in order to explore effects arising from trapped vacancy-dopant clusters formed due to magnesium (Mg2+) and strontium (Sr2+) doping. Fluorine-19 (19F) and oxygen-17 (17) NMR will be used to investigate local structure and mobility; the local environments surrounding the cations will be probed by using gallium-71 (71Ga) and magnesium-25 (25Mg) magic angle spinning (MAS) nuclear magnetic resonance (NMR) spectroscopy. Finally, MAS NMR methods will be used to study a series of battery electrode materials and related compounds. Many of these materials show metallic behavior and one aim of the work is to develop straightforward approaches for extracting structural/electronic information from the NMR spectra of these compounds. The research program will be incorporated into outreach activities involving both high and middle school students, undergraduates and the community at large. The P.I. runs a high-school program for minority students, which focuses on power sources, where the students synthesize battery electrodes (e.g., lithium manganese) and test their own batteries. NON-TECHNICAL EXPLANATION Improved batteries and fuel cells with higher power densities are critically needed to help facilitate the move from an oil-based economy, to an economy based on a more diverse range of energy sources. New materials are required which will allow rapid transport of oxygen ions through a solid in order to lower the operating temperatures of a solid oxide fuel cell (SOFC), and reduce the costs of these devices. The aim of the first part of this research program is to identify, via the use of solid-state NMR methods, phenomena that limit conductivity of oxygen ions in membranes and at the interfaces between two different materials. Solid-state NMR methods allow the ions that move in a solid to be observed directly, and their mobility to be measured. The results from this program will help in the design of improved fuel cells and other devices where oxygen conduction is important (e.g., oxygen/nitrogen separations and oxygen sensors). In the second part of the research program, NMR methods will be used to study a series of battery electrode materials and related compounds in order to understand how these materials function. The research program will be incorporated into outreach activities involving both high school and middle school students, undergraduates and the community at large. The P.I. runs a high-school program for minority students, which focuses on power sources, where the students make and test their own batteries. | |||||||
| Added: | ||||||||
| > > | ||||||||
Personal Preferences (details in TWikiVariables)
| ||||||||
Revision 220 Jun 2005 - Main.JasperShahn
| ||||||||
| Deleted: | ||||||||
| < < | ||||||||
| ||||||||
| Added: | ||||||||
| > > | Public information on Grants associated with NYSBC Award Number 0506120 Award Instrument Continuing grant Program Manager David L. Nelson DMR Division of Materials Research MPS Directorate for Mathematical & Physical Sciences Start Date July 1, 2005 Expires June 30, 2006 (Estimated) Awarded Amount to Date $137000 Investigator(s) Clare Grey cgrey@sbchem.sunysb.edu(Principal Investigator) Sponsor SUNY at Stony Brook Stony Brook, NY 11794 631/632-9949 NSF Program(s) SOLID-STATE CHEMISTRY Field Application(s) 0106000 Materials Research Program Reference Code(s) AMPP,9161 Program Element Code(s) 1762 Abstract TECHNICAL EXPLANATION New solid-state electrolytes with higher ionic conductivities are required in order to lower the operating temperatures of a solid oxide fuel cell (SOFC). In this research project, two phenomena that limit ionic conductivity at low temperatures or that may help in the design of materials with very high conductivities at moderate temperatures will be investigated. Specifically, solid-state NMR spectroscopy will be used to (i) investigate structure and ionic mobility at the interfaces between two phases (e.g., heterolayers formed of CaF2? and BaF2?) or at the surfaces of nanoparticles, and (ii) identify the cation sites that are nearby the oxygen-ion vacancies in the moderate oxygen-ion conductor, doped lanthanum gallate (La0.9Sr0.1Ga0.9Mg0.1O3), in order to explore effects arising from trapped vacancy-dopant clusters formed due to magnesium (Mg2+) and strontium (Sr2+) doping. Fluorine-19 (19F) and oxygen-17 (17O) NMR will be used to investigate local structure and mobility; the local environments surrounding the cations will be probed by using gallium-71 (71Ga) and magnesium-25 (25Mg) magic angle spinning (MAS) nuclear magnetic resonance (NMR) spectroscopy. Finally, MAS NMR methods will be used to study a series of battery electrode materials and related compounds. Many of these materials show metallic behavior and one aim of the work is to develop straightforward approaches for extracting structural/electronic information from the NMR spectra of these compounds. The research program will be incorporated into outreach activities involving both high and middle school students, undergraduates and the community at large. The P.I. runs a high-school program for minority students, which focuses on power sources, where the students synthesize battery electrodes (e.g., lithium manganese) and test their own batteries. NON-TECHNICAL EXPLANATION Improved batteries and fuel cells with higher power densities are critically needed to help facilitate the move from an oil-based economy, to an economy based on a more diverse range of energy sources. New materials are required which will allow rapid transport of oxygen ions through a solid in order to lower the operating temperatures of a solid oxide fuel cell (SOFC), and reduce the costs of these devices. The aim of the first part of this research program is to identify, via the use of solid-state NMR methods, phenomena that limit conductivity of oxygen ions in membranes and at the interfaces between two different materials. Solid-state NMR methods allow the ions that move in a solid to be observed directly, and their mobility to be measured. The results from this program will help in the design of improved fuel cells and other devices where oxygen conduction is important (e.g., oxygen/nitrogen separations and oxygen sensors). In the second part of the research program, NMR methods will be used to study a series of battery electrode materials and related compounds in order to understand how these materials function. The research program will be incorporated into outreach activities involving both high school and middle school students, undergraduates and the community at large. The P.I. runs a high-school program for minority students, which focuses on power sources, where the students make and test their own batteries. | |||||||
Personal Preferences (details in TWikiVariables)
| ||||||||
Revision 120 Jun 2005 - Main.ClareGrey
|
View topic
| History: r8 < r7 < r6 < r5
| More topic actions...
Copyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding this intranet, Send feedback
Ideas, requests, problems regarding this intranet, Send feedback