Difference: GlowDischarge (11 vs. 12)

Revision 1230 Oct 2007 - Main.KdDerr

 
META TOPICPARENT name="VacuumEvaporator"
Glow Discharge in Edwards 306

Changed:
<
<
  • Recommended that GLow Discharge be carried out by the dedicated units
>
>
  • Recommended that Glow Discharge be carried out by the dedicated units
 
  • You will need to install the plasma ring for this procedure (see poster) glowdischarge.jpg

  • Load sample
  • Press cycle allow vacuum pump down to 1.0x 10-1
  • Press seal
  • If the vacuum is too good adjust with unmarked knob under bell jar (bleed valve)
  • Turn voltage knob to HT
  • Turn Selector to 5
  • Allow plasma glow for 1min
  • Return selector and voltage knob both to 0
  • Press seal to exit

  • Vent

Visit Cryo EM Web site at http://www.nysbc.org/facilities/CEM

-- DavidStokes - 18 Mar 2005

META FILEATTACHMENT attr="" autoattached="1" comment="" date="1193769600" name="glowdischarge.jpg" path="glowdischarge.jpg" size="267954" user="Main.KdDerr" version="1"
META FILEATTACHMENT attr="" autoattached="1" comment="Glow Discharge Conversion" date="1186412770" name="BOCPOSTER.ppt" path="BOCPOSTER.ppt" size="4520960" user="Main.KdDerr" version=""
View topic  |  History: r14 < r13 < r12 < r11  |  More topic actions...
 
Copyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding this intranet, Send feedback